Recommended Cover for Fan-Tastic Vent Roof Vent

Question

Question:

What is the best vent cover to use with this model fan? I’m not sure if I should use the Maxxair cover or the Fan-Tastic cover?

asked by: JOE N

0

Expert Reply:

The cover that I recommend for the Fan-Tastic Vent Roof Vent part # FV803350 is the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover part # DMC38FR. It uses existing holes so there is no additional drilling required and it's made here in the USA.

expert reply by: Conner L

0

Answer 1

The model you provided pictures of is from 2003 and is no longer available. To replace this fan with similar features and a roof top cover, I make a few recommendations. First, the MaxxFan #MA00-07000K which has a powered vent opener, the fan is…

view full answer...

Answer 2

I did some poking around and I was able to find the Replacement Fan Motor Assembly Kit for Dometic FanTastic Roof Vent Fans #FVK8017-00 which is the correct replacement fan and motor for your roof vent. Also, this is a reversible fan so it will work…

view full answer...

Answer 3

The MaxxFan Plus Roof Vent w/ 12V Fan part #MA00-04500K and the Fan-Tastic Vent Roof Vent w/ 12V Fan part #FV803350 are pretty much two different companies take on the same vent fan. They both have a powered lift dome, can be thermostatically…

view full answer...

Answer 4

Please check your specific fan for model number and compare to the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans, #FVK8017-00. This replaces the bow-tie bracket, motor, and blade for your Fan-Tastic Vent roof vent fan working…

view full answer...

Answer 5

We've actually had this one asked before and have consulted with MaxxAir. Even though you can technically install the MaxxFan Deluxe Roof Vent #MA00-06401K wired to a separate switch, it is not recommended. The reason for this is that their fans…

view full answer...

Answer 6

Yes, the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover #DMC38FR that you referenced is actually an exact fit with the Fan-Tastic Vent Roof Vent that has the rain sensor like part #FV803350 or part #FV807350. The cover is designed to allow the…

view full answer...

Answer 7

There are only two wires on the Fan-Tastic Vent Roof Vent w/ 12V Fan part #FV801208, a white wire which is the ground and then a black wire which is the power. The ground wire will need to be ran to a bare metal surface and the power wire will need…

view full answer...

Answer 8

If you cut the two wires of the rain sensor of the Fan-Tastic Roof Vent part #FV803350 and made sure they didn't touch each other that would disable the rain sensor function as basically the rain on the sensor panel completes the circuit between…

view full answer...

Answer 9

You would want the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover #FVU1500WH which was designed to fit all Fan-Tastic roof vents like what you have. This will allow you to open your roof vent.

view full answer...

Answer 10

Since MaxxAir MaxxFan Deluxe - Smoke Item #MA00-07500K sticks up more than a regular vent you will likely have to remove the cover that you already have. Fan-Tastic Vent Roof Vent w/ 12V Fan and Thermostat - Powered Lift - 14-1/4" x 14-1/4"…

view full answer...

Answer 11

There are no individual wheel and gear pieces available for the Fan-Tastic Vent Roof Vent w/ 12V Fan and Thermostat #FV803350. The only replacement parts available are the 3-Speed Switch #FVK1031-05 and the Fan Motor Assembly Kit #FVK8017-00.

view full answer...

Answer 12

I reached out to my contact at Fan-Tastic Vent and she said the correct replacement motor for your 12V Vent Fan #FV803350 if it was manufactured after 2014 is the 17-rpm #FVK6010-81. This does operate at a higher speed than what originally came on…

view full answer...

Recommended Cover for Fan-Tastic Vent Roof Vent

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching