Replacement Electric RV Steps For A 2015 Earthroamer Expedition Vehicle

Question:

I have a 2015 Earth Roamer expedition vehicle. I have damaged the step. The mechanism still works, but the unit is bent. it is a three step with 24inch wide steps and a thread height of 8. Is this the replacement unit? Will I have to just unplug and remove the old and replace with the new?

asked by: Blaine L

Expert Reply:

To find the right set of RV steps we'll need to take two other measurements; the entry height (from the ground up to the mounting bracket) and the mounting bracket width to determine the correct fit. We have two different 24" wide 3-Step models from Kwikee that have different bracket widths that you can check with your current setup to determine the correct fit.

Kwikee Electric RV Step Complete Assembly - Triple - 23 Series - 24" Wide # LC3694042
Entry Height: 27-1/4" - 29-1/4"
Bracket Width: 26-5/16"

Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - 25 Series - 24" Wide # LC365837
Entry Height: 27-7/8" - 29-7/8"
Bracket Width: 25-1/2"

If you find that neither step matches up to your mounting brackets then you can also cut them off and bolt on Outriggers # LC301704 to match the new step mounting points. You could also check down by the motor and control module for any kind of identification stating the series number for your steps and we could look for the replacement that way.