How To Determine Which Grease Seal Fits Dexter 6,000lb Axle  

That is correct. The #GS-2250DL is the direct replacement for your old grease seal marked P02860 on your 2019 Keystone Cougar.

The 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm not totally sure what they used to create…

The carrier in your picture looks like it's welded to the rear bumper so the closest option we would have would be the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR that you were looking at. This carrier comes with brackets that can fit…

Hi Todd, I do have a drill-powered A-frame jack for your enclosed trailer that meets all of your needs, and what I recommend for you is the Lippert Quick Drop Tongue Jack #LC733926. The #LC733926 just requires a 3/4" socket which you can use…

The Tru Ryde grease seals you mentioned, part #RG06-70 are indeed a replacement for the 10-036-00 Dexter seals. They would work great for your application.

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

The Grease Seal - Double Lip - 2.250" ID - 3.376" OD #GS-2250DL and Grease Seals 10-36 (pair) #RG06-070 have the same exact measurements of 2.250" inside diameter and 3.376" outside diameter so they will work for the same…

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The TruRyde Grease Seal part #RG06-070 and Dexter Oil Seal part #10-63 are both designed for the same size spindle as they have the same dimensions, 2.250" inner diameter and 3.376" outer diameter. That said, the TruRyde is a grease seal…

The part number "TCM22333TBN" that you referenced on your grease seal cross-references to the Grease Seals 10-36 part #RG06-070. If you need any other parts for your trailer hubs i.e. bearings or races, I would need to know either the part…