Question:
Will there be some trimming required? Do you have any pictures of the hitch installed on a 2010 G37 Coupe?
asked by: Paul
Expert Reply:
There is some trimming required on the 2010 Infiniti G37 coupe to install Curt trailer hitch # C11493. There is an area approximately 1-3/4 inches by 2 inches that will need to be trimmed off the bumper fascia. I have included a picture that shows the hitch installed on a vehicle and the area that gets trimmed.
If you plan on doing some towing first check the vehicle owners manual for its capacities. The recommended ball mount is # C45521 and use # F-4 for the pin and cip. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. For trailer wiring use # 119147KIT.
If you will be using the hitch for any non-trailer loads such as a bike rack or cargo carrier Curt requires the use of a stabilization strap, # 18050 for their warranty. The strap is designed to take up some of the stress from the hitch.
Upgraded Modulite Vehicle Wiring Harness Kit w/ 4-Pole Trailer Connector and Installation Kit
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
