Ground Clearance for Curt Trailer Hitch that Fits 2012 Chrysler Town and Country

Question

Question:

Can you tell me what the height from the ground to the receiver will be once the curt class III hitch is installed on a 2012 Chrysler Town and Country

asked by: Andrew K

0

Expert Reply:

When we installed the Curt hitch # 13364 on a similar 2012 Chrysler Town and Country we found that from the ground to the bottom of the hitch is right at 9-1/2 inches.

expert reply by: Jameson C

0

Answer 1

In general, a properly selected and installed weight distribution system like the Reese Strait-Line #RP66082 will do more to improve the overall towing quality of a trailer than a set of rear air bags in the tow vehicle. The WD system actually shifts…

view full answer...

Answer 2

There is no specific 'best' rise or length of ball mount for a given vehicle. Since the hitch and coupler height of every vehicle and every trailer is different, you'll need to take some measurements. To determine the rise/drop of ball…

view full answer...

Answer 3

You can install a stack cooler in your vehicle. The Class ratings are there as a reference point to a hitch Class. For example if someone has a Class III hitch they can look at coolers, see a Class III and say, hey, I have a Class III hitch so this…

view full answer...

Answer 4

We have a couple of options for you including the Redarc Tow-Pro Liberty Brake Controller part #RED24FR. The easiest way to get brake power to your trailer is to use the Curt Echo Wireless Trailer Brake Controller part #C51180. If you currently have…

view full answer...

Answer 5

The method we use to determine the correct line to install a transmission cooler on is pretty simple. You want to install the cooler on the return line. To determine which line is the return line you will want to start with your truck totally cooled…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The hitches offered for the 2013 Grand Caravan and Town and Country set back under the rear bumper at a different distance. The Curt #13364 hitch has a 4 inch distance from the hitch pin hole to the rear most portion of the bumper, while the…

view full answer...

Answer 8

We have actually installed both Curt Trailer Hitch Receivers, parts #C12264 and #13364, as well as both Draw-Tite Trailer Hitch Receivers, parts #36455 and #75579, on similar 2012 Chrysler Town and Countrys. Out of all 4 of those choices the…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Ground Clearance for Curt Trailer Hitch that Fits 2012 Chrysler Town and Country

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching