Replacement Brakes and Hub/Drum Assembly for Eagle Boat Trailer With 6k Axle

Question

Question:

Im looking to replace the drum brakes on my Eagle boat trailer. The Axle is made by Axis Products, Inc. Capacity - 6000 lbs Serial Number: 46939 005- 3/00 Can you help me find a brake assembly and drum/hub combo? Thank you

asked by: Erik

0

Expert Reply:

Thank you for providing that information. Since you have a 6,000 lb axle we can narrow down the parts. However, you will still need to identify your grease seal. Unfortunately, the serial number won't help in this case since Axis Products, Inc. was sold in 2015 so no information is available.

For brakes you can use the # AKEBRK-7-SA if you need electric brakes or the # AKFBBRK-7 for hydraulic brakes. For the hub/drum assembly we have a few options based on the grease seal inner diameter as well as your bolt pattern. More than likely your grease seal ID is 2.250" but it is possible it is 2.125" so you will need to verify this first. You can choose from the following:

-Easy Grease Trailer Hub and Drum Assembly - 6 on 5-1/2 - Pre-Greased # AKHD-655-6-EZ-K (2.25" Grease Seal ID)

-Dexter Trailer Hub and Drum Assembly - 6 on 5-1/2 - Pre Greased # 8-201-9UC3-EZ (2.125" Grease Seal ID)

-Dexter Trailer Hub and Drum Assembly - 8 on 6-1/2 # 42866UC3-EZ (2.25" Grease Seal ID)

-Dexter Trailer Hub and Drum Assembly - 8 on 6-1/2 # 8-219-4UC3 (2.125" Grease Seal ID)

expert reply by: Robin H

0

Answer 1

Ben, for your Axletek 12HFB-GG you are going to need the etrailer Electric Trailer Brakes #AKEBRK-7-SA to replace your brakes. These brakes are 12" x 2" in diameter, will work with both 5.2k to 7k axles, will work with wheels that are…

view full answer...

Answer 2

You are 99% of the way there! The Trailer Hub and Drum Assembly #AKHD-655-6-EZ-K is the correct replacement for your 8-201 Dexter Axle Hub/Drum Assemblies #8-201-9UC3-EZ with the exception of the grease seal that comes with it. The Dexter Axle option…

view full answer...

Answer 3

The only difference between the #AKHD-655-6-K and the #AKHD-655-6-EZ-K is the cap that the hub uses. One is a solid cap and the other has a rubber plug that can come off for access to EZ lube fittings. Since you have caps already you could use either…

view full answer...

Answer 4

If the original seal had an inside diameter of 2.250, then that is the size I would stick with. The inside diameter is what rides on the spindle so you would not want to go with a smaller seal as you mentioned. We have two seals that have the 2.250…

view full answer...

Answer 5

I just confirmed with Dexter that the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs item #23-180-181 you were looking at are the correct replacements for the AL-KO brake assembly part #s 363233.1 and…

view full answer...

Answer 6

You already did all of the work here by finding the bearings. Since you have a #25580 inner and #15123 outer bearing the Easy Grease Trailer Hub and Drum Assembly for 6K Axles #AKHD-655-6-G-EZ-K will work as a replacement. The only other thing to…

view full answer...

Answer 7

In order to find the correct replacement parts for your 2000 Eagle boat trailer you will need to identify your axle. We have no way of looking up specific parts for your trailer. A good place to start would be with the axle tag. This should have the…

view full answer...

Answer 8

I can help you determine the correct size for replacement brakes but we don't have a database of parts for specific trailers. With bearings #L68149 and #L44649 this narrows it down a lot. If do indeed have a 3,500 pound then you'll need 10…

view full answer...

Answer 9

We have a few product options to replace your brake assemblies. I recommend the Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs #AKFBBRK-35-D. This will give you both assemblies for one axle. These…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Replacement Brakes and Hub/Drum Assembly for Eagle Boat Trailer With 6k Axle

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching