5TH Wheel Bed Rails and In Bed Wiring For a 2017 GMC Sierra 2500HD  

Yes, there is an option to add an aftermarket under bed puck system to your 2018 Chevy Silverado 2500. It is the Elite Series Under-Bed Gooseneck Complete Hitch item #RP30158-68. This under bed system has a towing capacity of 25,000 lbs. I have…

The Elite Series Under-Bed Gooseneck Complete Hitch #RP30158-68 is the only way to get a puck system in the bed of your 2016 GMC Sierra 2500 but will come with a gooseneck ball center. This means you would have to use a 5th wheel hitch that has feet…

The TorkLift StableLoad Suspension Upgrade for Upper Overload Springs, #TLA7202 are the fit for your 2016 GMC Sierra 3500. They will assist in reducing side to side sway as well as porpoising, and they will reduce body roll. They will reduce the…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

It sounds like you could have a set of standard fifth wheel rails that most manufacturers use for their fifth wheel hitches to install into. The different manufacturers all make their own brand of rail kit, but they all have basically the same…

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.