Which 21k Demco Hijacker Fits OEM Pucks of 2020 Ford F-350  

Great questions! Reese actually makes the OEM puck system for Ford so if the 2022 F-250 is cheaper by a lot then I recommend going that route and installing the Under-Bed Rail and Installation Kit #RP87FR. The only thing you'll really be missing…

I have a great option for you that doesn't require rails in the bed. I recommend the Demco 21K Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider part #DM8550037 and the under bed rails part #DM8551009 for the 2020 Ford F-250 Super Duty. The…

The Demco Hijacker Autoslide 5th Wheel Hitch part #DM8550038 is specifically designed to fit Ford trucks that were equipped with the factory prep package and cannot be installed unless you have this package or have the dealer install it. I do…

I'm not super sure what you're looking for but it sounds like you're describing the Demco Autoslide 5th Wheel Hitch w/ Slider - Single Jaw #DM8550038. This hitch has an automatic slider that will slide toward the tailgate when making a…

For your 2016 Ford F-250 SD Crew Cab with 6-3/4-foot bed you will need to use a sliding 5th wheel hitch to have enough turning clearance to avoid trailer-to-cab contact. All slider hitch fits for your truck are shown on the linked page. The amount of…

The Demco Hijacker Autoslide 5th Wheel Hitch part #DM8550038 and the Demco Hijacker Autoslide 5th Wheel Hitch part #DM8550037 are the same hitch. The only difference is the side plates they come with, the former has side plates for the puck system on…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…