Trailer Hitch for 2023 Kia Sportage EV

Question

Question:

Do you have a Curt trailer hitch for a 2023 Kia Sportage Sportage EV? I noticed the 2023 has three places for bolts on each side rather than for four that it shows in the video for an earlier model.

asked by: Buzz C

0

Expert Reply:

We do offer a Curt Class III hitch for the 2023 Kia Sportage.

We offer the Curt 13485 as part # C94WR. According to Curt, the hitch fits all models of the 2023 Sportage, including the EV.

Per the linked install instructions, the hitch attaches to the frame members, using six M10 x 1.25 -35mm Class 10.9 bolts, four from the sides and two from the underside. The 2023 Sportage is the first model year of the 5th generation, so this would explain the differences in the number of attachment points.

The linked video shows the hitch being installed on a Hyundai Tucson, but the install process would be the same.

expert reply by: Mike L

0

Gregg

5/6/2024

Mike, all hitch offerings for current model Kia Sportage state the hitch is not approved for use with a weight distributing hitch. However, I currently use a weight-distributing hitch for my 3,000 camping trailer. Can you explain why this hitch should not be used with a weight-distributing hitch system? Thanks so much.

Reply

Mike L.

5/15/2024

Hi Gregg, It's not the hitch itself that is the issue, it's the part of the vehicle that the hitch attaches to. A weight distribution kit applies a large amount of force to the trailer/vehicle connection. The fear is that this extra force could cause the hitch attachment points on the vehicle to fail. We do have some alternatives for you, though. If you're using the weight distribution system to reduce the sag caused by the trailer's tongue weight, a product like the Coil SumoSprings, part # CSS-1125R will help to eliminate that. For trailer sway, you can use a friction sway control unit like # 83660. You'll also need a sway control ball bracket like # RP26003. Hope that helps!

Reply

Answer 1

Yes, the Curt hitch #C94WR does fit your 2023 Kia Sportage X-Line Prestige PHEV.

view full answer...

Answer 2

It looks like the instructions for the Curt #C94WR are back up and running. That being said, they do mention the panel that needs to be removed. We do mention that trimming may be needed to reattach this panel, but with this being as new as it is, we…

view full answer...

Answer 3

I recommend the Vehicle Wiring Harness #CU94FR which is confirmed to fit your 2023 Hyundai Tucson. I like this harness over the others that we offer because it has a more reliable powered converter box which will give you a longer run time then the…

view full answer...

Answer 4

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #CU94FR is a confirmed fit for a 2022 Hyundai Tucson per the manufacturer. These are tested on the vehicle for function prior to releasing fit. There would be no…

view full answer...

Answer 5

Yes the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C94WR is a confirmed fit for the 2022 Hyundai Tucson. For your wire harness use the Curt T-Connection Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #CU94FR. This will…

view full answer...

Answer 6

When we installed the Curt Trailer Hitch Receiver #C94WR on a 2022 Hyundai Tucson we found it to have a hitch height of 17" to the inside top of the receiver. This will put you at 14-1/2" of ground clearance to the bottom of the receiver.…

view full answer...

Answer 7

The best option for a trailer hitch receiver for a bike rack that fits your 2022 Hyundai Tucson plug-in hybrid is from Curt, and is the following part number: - Curt Trailer Hitch Receiver #C94WR I verified with Curt that the #C94WR is a fit for your…

view full answer...

Answer 8

According to Curt, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2, part #C94WR, is compatible with all versions of the 2022 Hyundai Tuscon, including your Hyundai Tuscon Hybrid Limited.

view full answer...

Answer 9

The Curt Trailer Hitch Receiver #C94WR for your 2023 Hyundai Tucson will only have the 5/8" holes for a hitch pin and clip. Curt does not offer a receiver with the type of anti-rattle hitch lock you described. We do have the Stainless Steel…

view full answer...

Answer 10

The hitch that I recommend for your 2022 Hyundai Tucson is the Curt Trailer Hitch Receiver #C94WR. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most common size…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Trailer Hitch for 2023 Kia Sportage EV

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching