Parts Needed to Convert Surge Disc Brake EZ Loader Trailer to Electric Over Hydraulic
Question:
I have a 2019 EZ Loader boat trailer with surge brakes. I want to convert it to electric over hydraulic and replace the tongue coupler with a straight coupler. The trailer has the Dexter PG1095 actuator on it right now, and the bolt pattern is different than any coupler I see on your site. Is it ok to drill holes in this coupler to match the current hole pattern? Or do you know of a coupler that will match?
asked by: Chris R
0
Expert Reply:
If you wanted to drill holes in the Demco Coupler # DM13203-95 to make it easier to attach to your trailer frame you certainly could. Just be mindful where you drill the holes and don't turn it into swiss cheese.
When it's time to pick out an electric over hydraulic kit I would highly recommend the Hydrastar actuators as they are the most reliable and among the quickest reacting. For a kit that comes with everything for your trailer you would want the # HS481-8067.
expert reply by: Jameson C
0
Products Referenced in This Question
Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes - OEM - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Product Page this Question was Asked From
Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 18K
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2-5/16 Inch Ball Coupler
- Bolt-On
- 18000 lbs GTW
- 3 Inch Channel
- Auto Latch
- Demco
more information >
Similar Expert Q&A Pages
- Replacement Coupler For Boat Trailer Bolt On Surge Coupler Switched to Electric Actuated Brakes
- Switching a 2002 Tricker Boat Trailer From Hydraulic To Electric Brakes
- Coupler Recommendation to Fit 3 inch Wide Coupler
- Coupler and Latch Locks for Use with Demco Channel Tongue Trailer Coupler DM13203-95
- Mounting Hole Spacing from Top of Demco Channel Tongue Trailer Coupler DM13203-95
- Distance From Rear Edge Of Demco Channel Tongue Trailer Coupler To Mounting Hole
- I Need a Trailer Coupler for a 2-5/16 Inch Hitch Ball
- Replacement For Cracked Trailer Coupler
- Bolt Hole Size for Demco Coupler # DM13203-95
- Permanently Removing Brakes from a Boat Trailer and Immobilizing the Actuator
- Recommended Coupler Lock for Demco Channel Tongue Coupler with eZ-Latch
- Coupler Recommendation for 12k Boat Trailer with 3 inch Wide Frame and 2-5/16 inch Hitch Ball
- Coupler that's Easier to Lock than Bulldog Collar-Lok
- Trailer Coupler for 3 Inch Square Stock Steel Tongue Compatibility
- What is Difference Between Demco Couplers # DM13203-95 # DM13203-52
- 2-5/16 Trailer Coupler Compatible With 3 Inch Channel Tongue
- Replacement Latch for Fulton 14K Straight Tongue Coupler or Replacement Coupler
- Recommendation For Converting Drum Surge Brakes To An Electric Over Hydraulic Drum Set Up
- Straight Channel Trailer Coupler for 2-5/16-Inch Hitch Ball
- Brake Assembly and Breakaway System for Trailer with 4,000 lb Axles
- Can Blaylock EZ Lock Trailer Coupler Lock Fit Demco Channel Style Coupler # DM13203-95
- Coupler That Automatically Closes and Pins Itself When Backed Into
- How to Convert Hydraulic Drum Brakes to Electric Over Hydraulic EOH