Will The Malone Storage Trunk Fit The Malone LowBed MicroSport Trailer With Bunk Boards For Kayak?

Question

Question:

I am wondering if this storage tote will work with the microsport trailer with the 2 bunks item number MAL25FR? I am not sure if it fits under the bunks and still allows you to get the lid off to store items.

asked by: Robert L

1

Helpful Expert Reply:

The Storage Trunk # MPG481 will not work with the LowBed MicroSport # MAL25FR as the bunks sit too low on the trailer. Instead you will want the Malone MicroSport Trailer # MPG461B2 or if you already have the LowBed you can use the Crossbar Conversion Kit # MPG475 to raise your crossbars so the storage trunk will fit and be able to remove the lid under the bunk boards to store your gear.

expert reply by: Bud M

1

Answer 1

The VIN sticker that comes with the Malone trailers like the Microsport part #MPG460G is supposed to be applied up near the coupler of the trailer on the frame. It comes as a separate decal though so it's up to you where to put it.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #e38NR. This gives you a 2-3/4" rise but that will still work for your…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The retractable tongue kit part #MPG494 that you referenced works perfectly fine with the Malone Microsport Lowbed part #MAL25FR that you also referenced.

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Will The Malone Storage Trunk Fit The Malone LowBed MicroSport Trailer With Bunk Boards For Kayak?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching