What Should Hanger Spacing Be on Triple Axle Trailer Dexter Suspension Kit # K71-360-00 5,200LB Axle  

The recommended hanger kit for a Triple-Axle Trailer Hanger Kit for Double-Eye Springs is part #APTT1. This kit is designed to work on axles with capacities of 2,000 to 7,000 pounds. If your mobile home trailer axle is within this weight capacity…

In order to determine the correct leaf spring hanger locations on a trailer you first need to position the axles correctly. I have attached a help article on this part of the process for you. Then, once the axles are correctly positioned you can then…

On equalizer 013-105-04 in kit #K71-360-00 the eye center to eye center measurement is approximately 7-1/2 inches.

If your shackles and equalizers are flipping upside down that would indicate you have either too wide of hanger spacing or you have equalizers that are too short. The easy solution will be to get the dimensions of your equalizer to me so that I can…

The amount of tilt I see in the pictures you submitted of your equalizer isn't too bad. That could easily be from the trailer not sitting perfectly level. If the trailer is level and it's still tilting this can be solved in one of three ways.…

It is very possible that the Dexter Heavy Duty Suspension Kit #K71-360-00 you were looking at will fit your 2008 Heartland RV Cyclone 5th Wheel Triple Axle Toy Hauler, but to confirm this you will want to measure the length of your existing…

The differences are the dimensions of the hangers and equalizers of the three kits. The #APTT1 uses totally straight equalizers and taller center hangers. The #APTT3 uses more traditional sized equalizers and center and outside hangers that differ in…

There will be different dimensions between the hangers. From front to back your hangers for that 20-3/8 inch spring like #e84SR will be 24-3/4 on center then 29 inches on center and finally 24-3/4 inches on center. This will put each of the 3 axles…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

The Dexter Heavy Duty Suspension Kit #K71-360-00 is designed for 33 inch axle spacing. To add your third axle, you cannot simply add a hanger spring and axle. You can keep your 35 inch spacing but you will need to relocate your hangers. I've…