Parts Needed to Add 7-Way to 2020 Kia Telluride

Question

Question:

I have a 2020 Kia Telluride S that has factory tow hitch with a2inch ball and 4 flat connection. Ive watched all of the different videos and still dont feel like I am confident on the answer. I want to upgrade to 7-blade, but I dont want it o be a partial upgrade. I want to have brakes and AUX power. What is the best way to achieve these. Also, I have been hunting for info on figuring out how to add a front-end receiver hitch as well in order to mount a winch. Searching for the answer to my latter question has proven futile and ai am hopeful you can help. thanks so much for your time and attention.

asked by: Kell K

0

Expert Reply:

Adding a 7-way to your 2020 Kia Telluride with the functions you need is fairly simple. Since you already have a 4-way installed the only thing you need is the # ETBC7. This comes with the adapter, wiring, breakers, and everything else required for installation. It will connect to your existing 4-way and add 12V power, brake controller output, and auxiliary/reverse light functionality.

You aren't finding anything on a front hitch since there are no custom fit options available. This really only leaves you with two choices if you want to add one. The first is to install a universal hitch like the # 41990-07. This is a weld-on hitch so you will need to take it to a certified welder for installation. The second option is getting a receiver like # E17 and taking it to a fabricator to fashion a hitch for your vehicle.

I have attached an installation video below for your reference.

expert reply by: Robin H

0

Answer 1

For your 2020 Kia Telluride you need to start off with the T-Connector Wiring #CU94FR which plugs into a connector under your vehicle on the driver's side. Then for a brake controller I highly recommend using the Curt Echo #C51180 because you…

view full answer...

Answer 2

I do have a solution for you, however, we not offer winch mounting plates specifically for Badlands Winches. Most winches use the industry-standard bolt pattern, but you will want to verify fitment with Badlands or drill your own mounting holes if…

view full answer...

Answer 3

You will need to use a cheater bar on the end of the wrench to get enough leverage to loosen the nut on the ball on ball mount #C45036. Chances are the crescent wrench has a wide and flat handle so you will likely need to go to a hardware store to…

view full answer...

Answer 4

Many of the ball mounts we offer that we offer that fit 2 inch receivers like part #2753 which has a 2-3/4 inch rise or 4 inch drop, that are designed to be able to use in a rise or drop position by simply turning it upside down, without losing any…

view full answer...

Answer 5

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 9

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Parts Needed to Add 7-Way to 2020 Kia Telluride

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching