Recommended 5th Wheel Rail Kit for a 2023 Chevy Silverado 2500  

Curt has a set of fifth wheel brackets that fit your 2024 GMC Sierra 2500 with the part #C16429 which is part of the rail kit part #C16429-204. But the kit you mentioned does not fit your truck.

Yes. You can use the Curt Brackets #C16429 under your 2020 GMC Sierra 2500 and connect them to Reese Bed Rails #RP58058. These parts are universal as far as compatibility with each other, so there's nothing to worry about.

Yes, you can use a Reese 16K 5th Wheel Hitch like the part #RP30047 with any of the Curt Custom Fifth Wheel Installation Kits like part #C16429-204.

To add a 7-way connector to the bed of your 2023 Chevy Silverado 2500, I recommend the Curt 5th Wheel/Gooseneck Custom Wiring Harness item #C58FV. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your…

Hi there Brad; good questions and let's start with the 5th wheel base rails, as you will need new ones to go with a custom, no-drill install kit for your 2024 Chevy Silverado 2500. The reason is you can't mix and match base rails and…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

With this truck bed configuration (6-3/4) on your 2024 Silverado 2500, you'll need a slider hitch so that you can make turns properly without the trailer making contact with your truck. I recommend the B&W Patriot #BWRVK3270 due to it's…

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…