Recommended Hitch and Suspension Upgrade for a 2018 Honda Odyssey
Question:
To Whom It May Concern, We have a 2018 Honda Odyssey that we’ve added factory side rails and factory cross bars to the roof. With 4 kids and a dog we are starting to fill the thing up rather quickly and have never been able to take bikes or a boat kayak or canoe when we go camping. I’m looking at adding a hitch and see there are suspension improvements that would prevent the van from sagging as much when loaded. I’d like to explore what our options are for utilizing this van and hauling more, either on the roof or hitch. Can you help me with what are some good options? We currently have a 21 year old Thule cargo carrier we use that is about 7 92” long but that is it.
asked by: Adam B
Expert Reply:
It sounds like you have your roof top completely covered that's a large cargo box. I would be surprised if you weren't at or over your roofs capacity with it fully loaded. To add a hitch to your 2018 Honda Odyssey, I recommend the etrailer Hitch item # e98855. This hitch is custom fit and bolts to your Honda with included hardware. It is a class III 2" which will give you the most options for accessories and the highest capacity for towing.
Suspension upgrade options for your van are pretty limited. The Timbren Rear Suspension Enhancement System item # T26FR has a 3,500 lbs capacity and will keep your van from sagging. These replace your factory bump stops and limit the amount of travel in your suspension. This is the best option available and it will take care of the sagging issues. The only drawback is they can stiffen up your rear suspension during daily driving.
With the 2" hitch installed you can use any of the following to bring more stuff like kids bikes or have more room inside your van.
Cargo Carrier - 24x60 etrailer Cargo Carrier for 2" Hitches item # e98874
Bike Rack - Hollywood Racks Destination Bike Rack for 4 Bikes item # HR4000
If you end up towing a trailer you will also need a wiring harness item # C56382 and a ball mount kit item # C45534.
I also recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure the 4-way connector to your hitch. This will put it in an easy to reach spot and prevent the risk of it falling onto the road.
We had a bunch of installation and demonstration videos that we made on Honda Odysseys so I have linked them below. Feel free to email me back with any additional questions.
Products Referenced in This Question
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Round
- 5 Round
- 6 Round
- Tow Ready
more information >
Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- CURT
more information >
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- Pre-Torqued
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
24x60 etrailer Cargo Carrier for 2" Hitches - Steel - Tilting - Folding - 500 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Tilting Carrier
- Folding Carrier
- 24 Inch Wide
- Heavy Duty
- Fits 2 Inch Hitch
- 60 Inch Long
- Class III
- Class IV
- Steel
- etrailer
more information >
Hollywood Racks Destination Bike Rack for 4 Bikes - 2" Hitches - Frame Mount
- Hitch Bike Racks
- Platform Rack
- Folding Rack
- Frame Mount
- Hitch Lock
- 4 Bikes
- Class 3
- Fits 2 Inch Hitch
- Hollywood Racks
more information >
Timbren Rear Suspension Enhancement System
- Vehicle Suspension
- Rear Axle Suspension Enhancement
- Jounce-Style Springs
- Standard Duty
- Timbren
more information >
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 525 lbs WD TW
- Visible Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Suspension Enhancement
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Timbren Rear Suspension Enhancement System
- Video: How to Install: Timbren Rear Suspension Enhancement System on your 2022 Honda Odyssey
- Q&A: Need Suspension Enhancement System For 2018 Honda Odyssey
- Q&A: Comparing Aftermarket and OEM Hitches for 2020 Honda Odyssey
- Shop: Hidden Hitch by Draw-Tite Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2023 Honda Odyssey
- Video: Setting up the etrailer Trailer Hitch Receiver on a 2023 Honda Odyssey
- Shop: Curt Pintle Hook with 2-5/16" Ball for 2-1/2" Hitches - 20,000 lbs
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Search Results: coupler pin
- Search Results: c45056
- Search Results: ball cover
- Search Results: c58345
- Search Results: coupler latch pin
- Search Results: latch pin
- Search Results: c56382
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Air Lift LoadLifter 5000 Ultimate Rear Air Helper Springs with Internal Jounce Bumpers Review
- Shop: Brake Controller
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Article: Trailer Wiring Diagrams
on Trailer Hitch
