What is Hub Bore Diameter of Trailer Hub # AKHD-655-6-K
Question:
What is the minimum trailer rim center bore diameter needed to fit over these trailer hub and drums? I have a 2021 Ford Bronco with rims that have a 93.1mm center bore approx. 3.665354. I have extra matching rims/tires which I want to put on my trailer to match my Bronco once I convert the 8lug axle to this 6 lug unit
asked by: Martin
0
Expert Reply:
The center bore diameter of the trailer hub part # AKHD-655-6-K that you referenced is 3.409 inches. The wheels you have that have a 3.6 inch pilot diameter would fit over the hub bore.
expert reply by: Jameson C
0
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Similar Expert Q&A Pages
- Replacement for 4,400 lb Axle on 2018 Jayco White Hawk
- What is Difference Between etrailer Trailer Hubs # AKHD-655-6-K and # AKHD-655-6-EZ-K
- Recommended 5200-6000lb Axle For M105 Military Trailer Being Converted To Overland Trailer
- Solution for Needing Replacement Drum for AL KO 12 inch Hub/Drum
- How to Determine if Trailer Hub part # AKHD-655-6-K will Fit Trailer Axle
- How to Determine if etrailer Hub and Drum # AKHD-655-6-K Will Fit a Trailer Axle
- Recommended Tires, Brake Assemblies, And Hubs For 2004 Venture Boat Trailer
- Bearing and Seal Recommendation for a 6k Dexter Axle
- How Large is the Hub Bore on the Trailer Hub and Drum Assembly AKHD-655-6-K
- How Long Will Grease In Pre-Greased Hub Last When Kept In Trailer As A Spare?
- Does the 6,000 lb Trailer Hub and Drum # AKHD-655-6-K Come with Races
- Replacement Brakes and Hub/Drums for Lippert 298276 and 122463
- Replacement Hub/Drum for AL-KO 363239
- How to Tell if a Trailer Hub and Drum can Be Used with Electric Brake Assemblies
- Replacement Hub/Drum Recommendation for 2014 Cedar Creek Silverback with 6K Dexter Axles
- Availability of Replacement Hub and Drum Assembly to Add Brakes to M1102 Trailer
- Replacement For Lippert 136214 Hub and Drum Assembly
- Can a Dexter Hub be Swapped from Grease to Oil Bath?
- Difficulty of Converting Oil Bath Hubs to Grease
- How to Read the Lippert Components Axle Description Measurements
- Compatibility of 12 Inch Nev-R-Adjust Electric Brake Assembly for 6K Axles w/6 on 5-1/2 Hub & Drum
- Recommended Grease Seal for Dexter 6,000lb 6 on 5-1/2 Trailer Hub and Drum Assembly
- Can Oil Bath Hub be Converted to Grease Hub
- Information Needed To Find Replacement Wheel Stud For Axletek Trailer Hub
- How to Determine What Hub and Drums Will Fit Vintage Military Trailer
- Can a Dexter Hub and Drum Assembly Replace an AL-KO Trailer Hub and Drum Assembly
- How to Convert Oil Bath Hub to Grease - 10k Dexter Axles on BigTex 22GN