Recommended Blue Ox Flat Towing Parts for a 2023 Jeep Wrangler JL

Question

Question:

Blue ox tor bar and base plate and wiring for 2023 Jeep Wrangler JL Is better.then the road master. Will need blue ox part numders

asked by: Darryl S

0

Expert Reply:

To flat tow your 2023 Jeep Wrangler JL with a Blue Ox tow bar, base plates, and supplemental braking you will need the following parts:

Tow Bar and Safety Chains - Blue Ox Ascent Non-Binding Tow Bar item # BX4370

Base Plate Kit - Blue Ox Base Plate Kit item # BX1139

Supplemental Braking System - Blue Ox Patriot Radio Frequency item # BLU37TR

I checked our system and with Blue Ox's and they do not have any wiring for the 2023 Jeep Wrangler's so unless your motorhome uses a 4-way connector, my recommendations of using the Roadmaster wiring harnesses will stay the same. If you are using a 4-way connector than the Curt Custom Tail Light Wiring Kit for Towed Vehicles item # C96JR would be a better option because it is plug and play and you don't have to splice wires.

Roadmaster Flat Towing Wiring Harness

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267. This diode kit allows you to use your Jeep's tail lights and wiring system while preventing feedback from your RV. This kit will come with a 6-way socket for your Jeep as well as an adapter cable to go from the vehicle to the motorhome.

Please note that if your Jeep has ParkSense Proximity Sensors then you will need the Roadmaster Wiring Kit with Smart Diodes for Variable Voltage LED Tail Lights # RM47ZR and the Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit # RM-146-7 instead.

expert reply by: Jerred H

0

Answer 1

Hey Steve, thanks for reaching out again! Hopkins doesn't have any exceptions for their Wiring Kit #HM39VR which normally means it's compatible, but even though this is easier to install than a lot of the other options, from my experience I…

view full answer...

Answer 2

Hey Steve, thank you for the insight into your installation of the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5 on your 2024 Jeep Wrangler Unlimited! We try to get as much info on our site for future users to see, but sometimes the small…

view full answer...

Answer 3

Hi Steve! The easiest thing to do would be to use the Blue Ox Adjustable Drop Hitch Receiver Adapter #BLU48CR and the etrailer Magnetic Hitch Receiver Reducer Sleeve #e28JR so I recommend going that route. The only advantage you'll see from…

view full answer...

Answer 4

The part numbers you mentioned referenced connectors but we do have custom fit tow bar wiring for your 2022 Jeep Wrangler with the part #BLU79FR which will work great with the Demco SBS DUO part #SM99251 that you mentioned. There would be no feedback…

view full answer...

Answer 5

Hi Tony, thanks for writing in and yes, we can 100% get your 2023 Jeep Wrangler set up to be flat towed behind your Holiday Rambler motorhome. To make it easy to order I'll go ahead and list everything out for you. - Base Plate Kit: Roadmaster…

view full answer...

Answer 6

Yes, we do! It is the Hopkins Custom Tail Light Wiring Kit item #HM39VR. This will give you a plug and play set up to control your 2020 Jeep Wrangler's lights with your RV.

view full answer...

Answer 7

Your Suburban SW6DE takes a 3/4 inch anode rod like the part #CAM11563 which would work well.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR can be used with your LEDs, the only caveat is that if your Jeep has ParkSense proximity sensors then you'd need to use the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles…

view full answer...

Answer 10

For a 2023 Jeep Wrangler Rubicon 4XE I have the following flat towing component recommendations: Baseplate: The etrailer Invisible Base Plate Kit #e98948 you referenced would be a great option as long as you still have the factory plastic bumper. If…

view full answer...

Answer 11

For your 2023 Jeep Gladiator Mojave your options are either the Blue Ox Base Plate #BLU53FR which you found or the Roadmaster Direct-Connect Base Plate Kit #RM77VR. The kit #RM-521453-5 you found does not fit your Mojave package. Both the Roadmaster…

view full answer...

Answer 12

According to Blue Ox, the #BX88269 bulb and socket kit isn't compatible with a 2021 Jeep Wrangler. Instead, we have a plug and play option that would utilize the existing taillights on the vehicle. I'd recommend using the #BLU79FR. The…

view full answer...

Recommended Blue Ox Flat Towing Parts for a 2023 Jeep Wrangler JL

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching