Plug and Play Wiring Adapter For a Redarc Tow-Pro Elite Brake Controller in a 2023 Subaru Ascent

Question

Question:

Is there a plug and play adapter for installing a Redarc Tow Pro Elite in my 2023 Subaru Ascent with tow package? I don't want to have to splice in wires.

asked by: Will C

0

Expert Reply:

Yes, there is a plug-and-play harness for installing the Redarc Tow-Pro Elite Brake Controller # RED63RR in your 2023 Subaru Ascent with tow package.

You just need the Tekonsha Plug-In Wiring Adapter # 3062-P. This adapter connects to the wiring harness included in the Tow-Pro Elite # RED63RR kit, to provide the plug-and-play installation you are wanting.

expert reply by: Scott S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

view full answer...

Plug and Play Wiring Adapter For a Redarc Tow-Pro Elite Brake Controller in a 2023 Subaru Ascent

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching