Disc Brake Kit for 2020 Grand Design Solitude 390RK with 7k Axles
Question:
I am looking to put a disc brake system on my 2020 Grand Design solitude 390rk with 7k axles can you verify the part numbers i need to do this. i am looking at K2R712DAC HBA16 20TA-BLKIT BK3-200 Please let me know if you see any issues with these items i have choose or if you think i will need anything else for this.
asked by: Jason A
Expert Reply:
The only thing your missing potentially is idler hubs for the Kodiak disc brake kit part # K2R712DAC to fit on which for that you'd want the # AKIHUB-865-7-2-EZ-K which comes with bearings so you would not need a bearing kit.
The Hydrastar actuator part # HBA16 is the best around so that's a good choice, and the brake line kit part # 20TA-BLKIT would work as well. Instead of the HBA16 though we have a kit that includes all of the needed electrical components as well which for that you'd want the part # HS381-9067.
Products Referenced in This Question
Kodiak Hydraulic Brake Line Kit - Tandem Axle - 20'
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 20 Feet Long
- Brake Lines
- Flexible Brake Hose
- Brake Line Kits
- Tandem Axle
- Kodiak
more information >
Easy Grease Trailer Idler Hub Assembly for 7,000-lb E-Z Lube Axles - 8 on 6-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- 25580
- 14125A
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- Marine
- Travel Trailer
- Disc Brakes
- Hydrastar
more information >
Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- Marine
- Travel Trailer
- Disc Brakes
- Hydrastar
more information >
Kodiak Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Dacromet - 1/2" Bolts - 7,000 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Rotor
- 1/2 Inch Studs
- 7000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Kodiak
more information >
Product Page this Question was Asked From
Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Bearings for a Dexter 7,000 lbs Axle and Wet Bolts for a Morryde CRE 3000
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: Replacement Bearings for Dexter Parts 031-017-02 and 031-030-02
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: When Should Trailer Wheel Bearings be Replaced
- Q&A: Replacement Wheel Studs For Dexter 10,000 lb Drum 9-123
- Q&A: Correct Bearing Kit for 2019 Jayco North Point 315RLTS
- Q&A: Are the MORryde Wet Bolts Compatible With Equa-Flex Equalizers on 2018 Momentum 395M?
- Article: Trailer Wiring Diagrams
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: 5 Things to Know About Weight Distribution Hitches