Timbren 2,000LB & 3,500LB Axle-Less Suspension Systems With #84 Spindle and 4 Bolt Brake Flanges  

Thanks for reaching out again, David! Yes, the Trailer Hub and Drum Assembly #AKHD-655-35-K will fit with the Timbren Axle-Less Trailer Suspension #ASR2KHDS02!

Great question! The Timbren Axle-Less Trailer Suspension System #ASR2KHDS04 has a standard size spindle which is why it is for regular tires. The Timbren Systems #ASR2KHDS03 and #ASR1THDS03 have longer spindles which can accommodate wider tires and…

Hey David, thanks for reaching out! It sounds like you have drums for a 3,500 lb axle so in that case, yes, the Timbren Axle-Less Trailer Suspension #ASR3500S05 will work for your application. To verify this on your end, your hub needs to use the…

You are correct that is a 3,500 lb axle. If you want a bearing kit the #BK2-100 you looked at is the right one. This comes with a #L44649 outer and #L68149 inner bearing along with a #58846 (10-19) grease seal. If you want a replacement idler hub you…

There are Timbren axle-less suspension systems that do not come with hubs so that you could add your own such as #AKIHUB-550-35-EZ-K. But the hubs with 5 on 5 bolt patterns that would also fit a Timbren system only accept up to 15 inch wheels. The…

We have straight axles that are close to the measurements you have provided, see link, but the spring seats would have to be moved and none of them have brake mounting flanges. I propose a different approach by using a Timbren axle-less system…

While we don't carry that specific part number essentially it is just a 3,500 lb trailer axle hub/drum that has a 6 on 5-1/2 inch bolt pattern like the Dexter #84656UC3-EZ so this would work perfectly for you.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

Hey Jim! The Taskmaster and Westlake tires, like the Taskmaster ST235/75R15 Off-Road #TA45RR and Westlake ST235/75R15 Off-Road #WST54FR you were looking at, are made in China. A lot of people tend to shy away from trailer tires made in China but…

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…