Replacement Tongue Jack With Wheel For 2000 MasterCraft Prostar 205 Boat Trailer Not Bolt-On  

We do have replacement parts for disc brake actuators yes, however I would need to know exactly what brake actuator you have in order to confirm fit. I don't have any parts breakdown for your trailer if that is what you were hoping for. The…

I am sure we have a suitable replacement surge actuator for your trailer. But when I tried to look up your trailer on google every one of the pictures had the coupler cut off. If you could send me a picture of your coupler as well as the weight of…

If you could provide me with a part number off of one of your hubs I would be more then happy to look and see if we've got a gasket, solution, or a replacement hub. I do not have any way of knowing what hub is on your boat trailer though.…

We do have a potential solution for you. Unfortunately, the swing away actuators like the one on your 2005 Mastercraft trailer have been discontinued, so I am afraid there is no direct replacement, or anything that will fit inside the current swing…

Your picture is of a coupler that is also a brake actuator for hydaulic brakes. Very much like part #DM72VR although not exactly. Connecting the trailer to your tow vehicle is just the same as any other it's just harder to see. Under the coupler…

To select the correct replacement disc brake pads click the provided link and filter the results by weight capacity and brand.

While we do have replacement jacks that will work for your 1996 Mastercraft Prostar 190 trailer, there are none that are going to be a direct bolt-on replacement for the bracket you currently have on. So what you will need to do is use a bolt-on jack…

If the holes on your mount are separated by 3 inches the Fulton trailer jack #FXP100W0301 will fit. If you need a new mount you'd need the #P9012-00. For new hardware for the bracket you'd need the #F0933325S00.

From the research I did the Kodiak 225 calipers like the part #KDBC225DAC that you referenced are an exact replacement for the Mastercraft setup you currently have.

Thanks for the picture of your trailer jack! Based on that all you need is the part #FXP100W0301 which will easily attach to the welded on bracket you have on your trailer frame.

The Timbren Axle-Less Trailer Suspension System w Hubs #A35RS545 is currently the only axle system we have that will replace the axle you have based on the length of your axle. This system will replace your axle and leaf springs with a progressive…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.