Recommended Crossbars for a Lance Truck Camper w/ Rails

Question

Question:

Hello there. I have a 2004 Lance Truck Camper 815 with the factory roof tracks I believe they are Yakima tracks. Can you help with what roof rack system would be best to fit into the tracks on the roof?

asked by: Devon

0

Expert Reply:

I would be happy to help you. For the Yakima tracks on your Lance 815 Camper, I recommend the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600. Which crossbars you need will depend on how far apart your tracks are mounted and how long of crossbars you are looking for. I don't have anyway of knowing this so I have listed all compatible options below:

54" long bars item # RRVA137B-2

59" long bars item # RRVA150B-2

65" long bars item # RRVA165B-2

71" long bars item # RRVA180S-2

79" Long bars item # RRVA200B-2

Additionally, the Rhino-Rack Roof Rack for Factory Tracks item # Y02-490B-NT you were looking at will work but they are only 59" long.

expert reply by: Jerred H

0

Answer 1

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 2

For your Lance 855s Camper with standard tracks I recommend the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 #RRRLT600 and then crossbars like the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black -…

view full answer...

Answer 3

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 4

A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hello Volker, thanks for reaching out. For your 2024 Chevy Silverado 2500 6.5' bed with steps in front and back of the bed you can use the following Torklift Camper Tie Downs: - Custom Fit Tie Down Kit #TL86NR Keep in mind that these will only…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

I would be happy to help you. There are two big differences in options for towing a 5th wheel trailer with your 2022 Chevy Silverado 2500. The first and easiest would be if you have the prep package. What that is is a from the factory option that…

view full answer...

Answer 12

Hey William, I 100% would choose the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 over installing the Lippert Center Point by Trailair Air-Ride Suspension Upgrade #LC1565391. We've run into numerous fitment…

view full answer...

Recommended Crossbars for a Lance Truck Camper w/ Rails

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching