Does etrailer Hitch # e38KR Fit 2024 Hyundai Tucson Hybrid

Question

Question:

the hitch for a Hyundai Tucson # Code: e38KR - will this fit a 2024 Hyundai Tucson HYBRID ?

asked by: Barry K

1

Helpful Expert Reply:

Yes, the etrailer hitch part # e38KR does fit your 2024 Hyundai Tucson Hybrid.

expert reply by: Jameson C

1

Answer 1

I highly recommend the etrailer Trailer Hitch Receiver #e38KR for your 2024 Hyundai Tucson PHEV because it's the only trailer hitch option for your vehicle that comes with a matte black finish. This finish not only looks more OEM than the…

view full answer...

Answer 2

Sure can, the correct trailer hitch and 4-way wiring harness for your 2024 Kia Sportage are the following: - etrailer Trailer Hitch Receiver #e38KR - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector #C99DR I verified both fits…

view full answer...

Answer 3

For a 2024 Hyundai Tucson you'll need the etrailer Trailer Hitch Receiver #e38KR. This trailer hitch has a 525lb tongue weight capacity to support the weight of your e-bikes. I've attached a short video below where Brad will walk you through…

view full answer...

Answer 4

I have linked the installation instruction below for the etrailer Trailer Hitch Receiver #e38KR. You will find the torque settings for the bolts on step 3 for attaching it to your 2023 Hyundai Tucson. We do not post these on our site incase the…

view full answer...

Answer 5

The best hitch for your 2023 Hyundai Tucson is the etrailer Trailer Hitch Receiver #e38KR. What sets this hitch apart from the other options is the matte black powder coat finish. This gives the hitch an OEM look and also does a better job hiding…

view full answer...

Answer 6

The highest capacity trailer hitch we offer for a 2022 Hyundai Tucson is the etrailer Trailer Hitch Receiver part #e38KR which has a 525 lb tongue weight capacity. The tongue weight capacity is the weight of the accessory and anything you have loaded…

view full answer...

Answer 7

When we installed the Curt Trailer Hitch Receiver #C94WR on a 2022 Hyundai Tucson we found it to have a hitch height of 17" to the inside top of the receiver. This will put you at 14-1/2" of ground clearance to the bottom of the receiver.…

view full answer...

Answer 8

There are 2 Receivers that are available for you 2022 Hyundai Tucson Hybrid. Both receivers are 2" class III receivers and are rated for a maximum of 525lbs of tongue weight and a trailer weight of up to 3,500lbs. The Draw-Tite Max-Frame Trailer…

view full answer...

Answer 9

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

view full answer...

Answer 10

Yes, this Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part #C94WR is a compatible hitch receiver and confirmed to fit your 2022 Hyundai Tucson Hybrid Limited.

view full answer...

Answer 11

The trailer hitch options for a 2022 Hyundai Tucson are both concealed meaning the crosstube is hidden. They also both install in the same way as well with no cutting or drilling required. In regards to the Curt Trailer Hitch Receiver part #C94WR and…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Does etrailer Hitch # e38KR Fit 2024 Hyundai Tucson Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching