Solution for Needing Replacement RV Cargo Door Hinge

Question

Question:

Looking for cargo door hinges, for Coachman Chaparral 2017 model M-381 RD , thank you!

asked by: Rick F

0

Expert Reply:

Usually RV cargo door hinges are piano style hinges that are between 3 and 4 feet like the part # MA85VR which is 4 foot long. This could also be trimmed down as well.

expert reply by: Jameson C

0

Answer 1

Hi Chris, Yes, you'll need the Curt Trailer Hitch Receiver #C37RV. This class III trailer hitch has a 4,000lb maximum towing capacity and 600lb tongue weight capacity, but you'll still want to refer to your Santa Fe's owner manual to…

view full answer...

Answer 2

Hey Chris, the CURT Class 3 Trailer Hitch #C37RV won't require any bumper modification, but the etrailer Class 3 Trailer Hitch will require some underbody panels/fascia to be trimmed for install.

view full answer...

Answer 3

Hey Rick, While we don't currently offer the Hyundai specific trailer hitch receiver tube cover we do offer a large variety of covers that would work. I've attached a link to our selection below, but if you're just looking for a rubber…

view full answer...

Answer 4

The side plates on the 3" Wide Continuous Hinge #MA65VR you found are 0.09" thick which is just under 3/32". We do have a 3" Wide #MA52VR which is 6' Long with a 1/2" pin that has 0.18" thick side plates which is…

view full answer...

Answer 5

We only have one piano hinge that is either 4" or 6" wide and constructed of either stainless steel or aluminum. That is the 4" Wide Continuous Hinge #MA38JR which is made of aluminum and 72" long with a 3/8" pin diameter. We…

view full answer...

Answer 6

If your trailer is brand new and recently purchased ideally you would return to the dealer to have the ramp corrected. The amount of misalignment you describe seems excessive for a brand new trailer. If the trailer is parked on uneven ground the ramp…

view full answer...

Answer 7

Yes, the Stainless Steel Piano Hinge #MA34ZR can be trimmed down. You will be able to weld it or drill holes to mount the hinge for your application.

view full answer...

Answer 8

Yes, you can cut the 8 foot long hinge kit part #MA32VR down to 7 feet in length and it would work great.

view full answer...

Answer 9

Yes, the 4" Wide Continuous Hinge #MA85VR can be cut down to 16" or 18" like you're wanting to do. This hinge measures 6' long, 4" wide, has a 270° rotation for full opening/closing and is made in the USA. Attached is…

view full answer...

Answer 10

The size 400/480 and 4.00/4.80are the same tire size. The 400/4.00 designation referrers to an older tire size that is no longer available and the 480/4.80 size will replace the older model sized. Therefore, a tire like the Kenda Bias Trailer Tire,…

view full answer...

Answer 11

Hello Gary. It looks like the Curt Class 3 Hitch #C37RV for the 2024 Hyundai Santa Fe is still in production. As of right now (4/19/24) we are expecting them to be available by early-mid July. They are currently available for pre-order if you want to…

view full answer...

Answer 12

The special trailer tire size 4.80-8 does have an overall diameter of right around 16-inches when the tire is mounted on the rim and inflated. The other popular trailer tire size that has about the same overall diameter is the 165/65-8 size, which is…

view full answer...

Solution for Needing Replacement RV Cargo Door Hinge

Product Page this Question was Asked From

Continue Researching