Replacement 58 inch Arm for Solera Edge RV Awning

Question

Question:

What replacement arm will work on a pro-0009063605 58 in solera

asked by: Jamie

0

Expert Reply:

Since your Solera arm is 58 inches long that would indicate it's a Solera Edge awning which means for a replacement drive arm you would want the part # LC22ED or for a replacement idler arm part # LC62ED.

expert reply by: Jameson C

0

Answer 1

We do have the Black version as part #LC62ED.

view full answer...

Answer 2

Thank you for providing your part number Steve. I was able to verify you will need the Replacement Idler Arm Assembly #LC75AF. We also have the Replacement Drive Arm Assembly #LC85AF.

view full answer...

Answer 3

For your 58 inch Lippert Edge RV awning the correct replacement idler arm is the part #LC62ED and the correct replacement drive arm (one with the motor) is the part #LC22ED.

view full answer...

Answer 4

In order to determine the correct replacement for your Lippert Edge awning you'll need to measure the length of your wall mount (see attached photo). Once you've got that number you can look for a replacement based off of that measurement.…

view full answer...

Answer 5

Hi Jesus, The number you provided comes back as a Solera Edge awning in black, but we'll need a bit more information to determine the correct arm because there's 3 different models in black. There should be another sticker on the arm with a…

view full answer...

Answer 6

The small pitch arm is not offered separately for the Lippert Edge awning you have, so you'd have to replace the entire assembly with the Replacement Drive Arm Assembly for Lippert Edge RV Awnings with LEDs #LC22ED and the Replacement Idler Arm…

view full answer...

Answer 7

Hey so I apologize for the delay on this and also for not being able to really help but I finally heard back from Solera and they said they don't have the dimension and they didn't have any in stock to measure. Also we don't have any in…

view full answer...

Answer 8

To order the correct Solera replacement arm size, simply measure the length of the wall-mount extrusion from top to bottom. I've pointed this out using the photo you sent in as an example. Short styles will measure 61-1/2" and use part…

view full answer...

Answer 9

The Lippert Arm Assembly #LC22ED is for an Edge awning comes with the drive head so you can use that part or the Arm Assembly #LC62ED for the idler head. These come with the LEDs on them as well. If you have the Edge awning on your Wolf Pup then…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacement 58 inch Arm for Solera Edge RV Awning

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching