Installing a 7 way Plug On An Australian 1998 Land Rover Discovery
Question:
I brought my 1998 Land Rover Defender from Australia to the U.S. Came equipped with a 7 pin flat connecter where the red wire is a sperate brake wire. I am needing to change this to a 7 pin round connector and there is not a separate wiring location for the brake wire, any suggestions?
asked by: Gavin
Expert Reply:
I do have a potential solution for you. Unfortunately we do not offer any kind of custom wiring kits or adapters you can use for this purpose. What you can do is remove the 7 pin flat plug and splice in a 7 way round plug like the # C57102. In order to separate out the turn signals from the brake lights you would need a converter, # 118158.
Products Referenced in This Question
Vehicle to Vehicle Tail Light Converter
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 7 Round
- 7 Round
- Tow Ready
more information >
Curt Trailer Connector Adapter with Backup Alarm - 4-Way to 7-Way RV and 4-Way Flat
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug Only
- 4 Flat
- 7 Round - Blade
- CURT
more information >
Product Page this Question was Asked From
Vehicle to Vehicle Tail Light Converter
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 7 Round
- 7 Round
- Tow Ready
more information >
Featured Help Information
Instructions
Similar Expert Q&A Pages
- How Can I Get Tail Lights on a Trailer with an Australian 7-Way Harness on My Trailer?
- What Powers The Diodes In A Diode Wiring Kit
- Converting a Trailer with 5 Round Connector to Car with 4-Way Flat Connector
- Dimension of the Vehicle to Vehicle Taillight Converter # 118158
- Converter Box for Separating Out Combined Trailer Wiring Circuits
- LED Third Brake Light Bar Option
- Troubleshooting Trailer Tail Light Turn Signals Flashing On Both Sides When Pressing Brake Pedal
- Installing Roadmaster Diode Wiring Kit # RM-15267 with Separate Wiring on RV and Towed Vehicle
- Taillight Converter to Separate Combined Taillight Circuits
- Why are Diodes Needed for Lighting when Flat Towing a Vehicle
- Installing Side Mount Turn Light on Trailer with Combined Brake,Turn Signals
- Can a Third Brake Light Be Added to a Trailer
- Recommended Wiring For Third Brake Light On Camper Shell
- How to Add Dedicated Turn Signals to a Trailer with Combined Function Taillights
- How to Wire Up a Trailer with Separate Taillights to a 4-Way
- Connecting 4-Flat US Trailer Connector to Australian 5-Round Trailer Connector
- Converter to Separate Out Stoplight Circuit from Stoplight on Truck Wiring
- Taillight Converter For Swapping 2 Wire Taillight Assemblies for European 3 Wire Taillights
- Availability of a Converter for US to European Wiring System
- Converter Needed to Run Separate Taillight Wiring on Trailer
- RV Brake and Towed Vehicle Brakes Both Applied via Diodes
- Tow Bar Lighting Recommendation for a 1993 Toyota Land Cruiser Towed By RV with 7-Way
- Will Vehicle to Vehicle Tail Light Converter # 118158 Work to Power a 3rd LED Brake Light
- Blue Ox 7-way to 6-way Coiled Electrical Cord - No Power on 12VDC Accessory Line
- Troubleshooting Weak Trailer Turn Signal Circuit on 2002 Dodge Durango
- Converter Recommendation for 1987 Jeey YJ for Adding Third Brake Light
- Where Can Dedicated Stoplight Circuit on 2010 Dodge Ram be Found
- Wiring Trailer with Separate Bulb System for Use with 4-Pole Wiring Harness on 2006 Kia Sedona