Will etrailer Brake Assembly # AKEBRK-35R Replace Dexter 023-027-00
Question:
Hey. I have a trailer brake issue. I think this one will fit. Everything seems good but the bolt pattern is in question. I measured mine at 2.75 inch bolt pattern. Center of bolt to center of bolt both ways. Will this brake fit that. Dexter 023-027-00 is the number for the brake I have.
asked by: Joel M
0
Expert Reply:
Yes, the brake assembly part # AKEBRK-35R is the correct replacement for the Dexter 023-027-00. It has the same bolt pattern and axle capacity so it would work great.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Are Trailer Brake Magnets Polarity Sensitive
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Trailer Brakes are Very Weak Even After Adjusting Them
- Article: Most Popular Wheel Bearings
- Q&A: How to Test Brake Controller without Trailer Connected
- Q&A: Installing Gorilla-Lift Utility Trailer Tailgate Lift Assist on Split Trailer Gate
- Q&A: Estimated Time to Remove and Install B&W Turnoverball Gooseneck Trailer Hitch
- Q&A: How to Choose the Correct Brake Assembly for Trailer Axles
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer