What Size Lunette Rings Are Compatbile With The Buyers Products 45 Ton Pintle Hook  

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Buyers Products 45 Ton Pintle Hook #337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is 6-1/2…

The standard size lunette ring is 3 inches like the Demco Lunette Ring - Adjustable Channel Mount - 3" Diameter - Black - 25,000 lbs #DM09557-81. The 2-1/2 inch rings will not fit in the adjustable channel mounts where the vast majority of the 3…

The Replacement Inner Slide Channel for Dexter Model 6 #T4846500183 has a shank that measures 3" wide x 2-1/2" tall to it's a little smaller than the 3" square shank that comes on the Replacement Inner Slide for Demco DA91…

The mounting holes for the Buyers Products 45 Ton 6-Hole Air Compensated Pintle Hook #337P45AC6 are spread 5" apart horizontally. The bottom 2 holes are spread 2-1/8" vertically while the top 2 holes are spread 2-3/8" vertically. I…

The Buyers Products 45 Ton Pintle Hook #337PH45 has a unique bolt pattern unlike others. I do agree the Clip #3370070055 does not seem sufficient, but the handle is spring loaded so the likely hood of it opening on its own would be next to impossible…

The Buyers Products 50 Ton Air Compensated Pintle Hook part #337PH50 measures 2.38" deep by 3" wide. The inner eye diameter is 1.60" wide and 1.37" tall. I contacted Buyers and this hook uses a standard Lunette ring.

I went out to our warehouse and measured the Buyers Products 45 Ton Pintle Hook #337PH45 for you. The mounting platform where the holes are drilled, has a thickness of 0.7 inches.

I do not have a cut sheet for Buyers 10-hole pintle hook part #337PH55 but the mounting hole diameter measures 0.812". The bottom mounting holes measure 1.062 inches center to center. From the center of the third mounting hole to the center of…

The upper holes for the Buyers Products 45 Ton 4-Hole Air Compensated Pintle Hook #337P45AC4 are spaced 5-1/4" on center. The lower holes are spaced 6-1/2" on center. The distance from the upper holes to lower holes are spaced 3" on…