Replacement Installation Hardware for Curt Trailer Hitch 13333 for a 2014 Ram 1500 Express

Question

Question:

I am reusing a Curt Hitch #13333 for my new 2014 Ram 1500 Express, what hardware do I need? I want what came with it, but am having trouble finding them on the site. Thank you.

asked by: Vince

0

Expert Reply:

For replacement mounting hardware for Curt trailer hitch # 13333 you will need replacement hardware kit # RHK. On the RHK page you will see a box to enter the hitch number and a box to choose the manufacturer of the hitch. Enter the information, click add to cart, and our team will assemble the correct kit.

I have also linked the installation instructions and a video showing installation on a 2013 Ram.

expert reply by: Michael H

0

Clay B.

6/23/2020

I bought the curt 13333 hitch off of amazon (curt was the seller) It said it came with the hardwire and wires to install and I didn’t receive any

Reply

Chris R.

6/26/2020

All of our custom trailer hitches include all the hardware necessary, but most don't include any wiring. If you need mounting hardware the part # RHK mentioned above is all that you need. Is your Ram not already equipped with a factory 7-Way connector for wiring?

Reply

Clay B.

6/29/2020

@ChrisR I’m sorry I must have worded that wrong, I did t receive the hardware or the wires used to install the bolt through the frame tubing. However I returned the hitch and reordered it and got the hardware necessary. Thank you for your reply.

Reply

Chris R.

7/2/2020

@ClayB That makes sense! I'm sorry for the confusion.

Reply

Answer 1

The Curt Class III 2-inch Hitch Receiver, part #13333, carries maximum tongue weight (TW) and gross trailer weight (GTW) ratings of 600/6,000 pounds. (If used with a weight distribution system these ratings increase to 1,000 and 10,000 pounds…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Hey Jesse, All of the Redarc brake controllers will work but for a 2022 Ram 1500 Big Horn you'd would want the Redarc Tow-Pro Liberty Brake Controller #RED87CR. This will come with a custom- fit wire harness to plug in instead of having to…

view full answer...

Answer 10

Hello Paul. Yes, we have replacement hardware kits for the trailer hitches that we offer. You will want to order the #RHK, above the add to cart button you will see a place where it says "Hitch Item Number" that is where you are going to…

view full answer...

Answer 11

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 12

We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item…

view full answer...

Replacement Installation Hardware for Curt Trailer Hitch 13333 for a 2014 Ram 1500 Express

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching