Hub with Bearings that Fits BT8 2k Axle Trailer Spindle TRU94FR  

It's possible we have a hub for your TeeNee trailer, though we don't have any way of knowing off-hand or cross-referencing what hubs you need. So in order to find the correct hubs you will need to take apart your current hub assembly and look…

I have a replacement axle option for you, but unfortunately the inner bearing #L44649 and outer bearing #LM11949 combination your utility trailer axle uses is not one that is common any more, and as such there is not any replacement hubs available.…

In order to recommend the correct replacement, I'll need to know whether you're looking for an idler hub (no brakes) or a hub/drum. I'll also need to know the reference numbers from the inner and outer wheel bearing. If you can't find…

The hub assembly we offer for a 2,200-lb EZ-Lube axle is part #8-259-50UC1-EZ. This hub has a zinc plating that makes it great for snowmobile trailers or boat trailers. The Inner bearing and race, outer bearing and race, grease seal, grease cap, and…

Since your Carry-On 5' x 8' Utility Trailer has a 2000lb GVWR it more than likely has a 2000lb axle and would need a hub that uses either inner and outer bearings #L44643 or #L44649. I know on The 5' x 8' Carry-On Trailer I bought…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hi Rusty; the Dexter #84546UC3-EZ and etrailer #AKHD-5475-35-K will both fit a 3,500 lb axle but they have different bolt patterns. You already ordered the Dexter in the past so I'm assuming your wheels are 5 on 4-1/2. For the same bolt pattern…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…