Are The Support Brackets For RV Bumper Included With The 24x60 etrailer Cargo Carrier # e99049?  

You will need to use a hitch mounted motorcycle carrier like the Ultra-Fab #UF48-979033 to carry your Honda Trail 125. This is required due to the weight of the Honda at roughly 250lbs. A bumper mounted rack like the Swagman #S64663 is only rated for…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

Hi Jon; the actual width of the #IN94MR cargo box is 63-1/2". The full outside dimensions are 63-1/2" long x 28" wide x 15-3/4" tall and the inside dimensions are 57" x 23-1/2" x 14-3/4". The 39" measurement…

The 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm not totally sure what they used to create…

Hi Todd, I do have a drill-powered A-frame jack for your enclosed trailer that meets all of your needs, and what I recommend for you is the Lippert Quick Drop Tongue Jack #LC733926. The #LC733926 just requires a 3/4" socket which you can use…

The carrier in your picture looks like it's welded to the rear bumper so the closest option we would have would be the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR that you were looking at. This carrier comes with brackets that can fit…

The 24x60 etrailer Cargo Carrier for RV Bumper #e99049 is going to measure 25-7/8" above your bumper since the outer dimensions of the carrier is slightly smaller at 25-5/8". That extra 1/4" is from the extra materials.

Yes, the 24x64 etrailer Cargo Carrier for RV Bumper, #e83YR is the built the same as the shorter version but with an extension to increase width. From the images you attached, if you remove the spare tire, you can install the 24x40 etrailer Cargo…

I recommend using either a 24x40 etrailer Cargo Carrier for RV Bumper #e99050 or 24x60 etrailer Cargo Carrier for RV Bumper #e99049 and moving the spare tire to either side of the bumper. You can see how the 40" wide carrier is installed with a…

I do have an option for you but there isn't a spare tire holder designed to be used with the 24x60 etrailer Cargo Carrier for RV Bumper part #e99049. That said, you might be able to use something like the CE Smith Spare Tire Carrier for Trailers…