4-Way Trailer Wiring For 2024 Kia Telluride With LED Taillights

Question

Question:

My 2024 Kia Telluride has LED taillights. Which 4-way trailer wiring harness is needed?

asked by: Gene M

0

Expert Reply:

Since your 2024 Kia Telluride has LED taillights, the correct 4-way wiring harness is the following:

- Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236

Then if you need a trailer hitch use the Trailer Hitch Receiver # e45ZR.

expert reply by: Kyle S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

view full answer...

Answer 6

Since your 2024 Telluride X-Line is not an LS or S model the correct wiring harness is the Curt #C29ZV. This will plug into the connection points in the rear cargo area and provide you with a 4-way to power your trailer's signal lights. The…

view full answer...

Answer 7

I'm not sure why they include that replacement latch but that is not required for any of the aftermarket hitches or wiring. It is probably something related to the installation of the OEM hitch. The etrailer #e45ZR you referenced is what I would…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

The correct wiring harness for your 2024 Kia Telluride SX Prestige X-Line is the Curt #C29ZV. This plugs into the connection points in your rear cargo area and is compatible with your LED lights. The #TK74CR is only designed to work with the LX and S…

view full answer...

Answer 10

Yes, it does! The Curt Hitch item #C13420 does fit the 2024 Kia Telluride. This hitch is custom fit and bolts to your Kia with included hardware. It is a class III hitch with a 2" receiver that has a 5,000 lbs towing capacity and a 750 lbs…

view full answer...

Answer 11

Hey Mike, thanks for reaching out! I recommend picking up the Curt T-Connector #C29ZV if you have a standard 2023 Kia Telluride, or the T-Connector #C93FV if you have an LX or S model without the LED tail lights. These install by teeing in behind the…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

4-Way Trailer Wiring For 2024 Kia Telluride With LED Taillights

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching