Weight of Curt Trailer Hitch Receiver For 2024 Toyota Grand Highlander

Question

Question:

how much does the Curt hitch for the 2024 Grand Highlander weigh?

asked by: Shane F

0

Expert Reply:

The Curt Trailer Hitch Receiver # C26VV that fits your 2024 Toyota Grand Highlander weighs 37 lbs.

expert reply by: Kyle S

0

Answer 1

The hands free liftgate of your 2024 Toyota Grand Highlander will still function with the Curt hitch part #C26VV installed but you would need to kick to either side of the hitch opening. Since the exhaust actually hangs lower than the hitch it…

view full answer...

Answer 2

Yes, it does. The Curt Hitch item #C26VV is the only hitch currently available that fits a 2024 Toyota Grand Highlander. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It…

view full answer...

Answer 3

Yes, the Curt cargo carrier 18153 will fit the Curt Trailer Hitch Receiver #C26VV on your 2024 Grand Highlander. The 2" shank matches the 2" receiver on the hitch.

view full answer...

Answer 4

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 5

To power the lights on your trailer you need the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector #C59236. This wiring harness uses quick splices to connect to your signal wiring. It also has a powered converter that connects…

view full answer...

Answer 6

I can definitely tell you the required tools, and I assure you, nothing wacky is needed for your 2024 Toyota Grand Highlander to install the Curt Trailer Hitch Receiver #C26VV. All that you need to install this hitch on your '24 Grand Highlander…

view full answer...

Answer 7

It does! I verified for you the correct fit for the trailer hitch on your 2024 Toyota Grand Highlander XLE is the following from Curt: - Curt Trailer Hitch Receiver #C26VV

view full answer...

Answer 8

I have attached a picture below of the Curt Hitch item #C26VV installed on a 2024 Toyota Grand Highlander. I really like this hitch because the crosstube installs behind the rear bumper leaving only the 2" receiver exposed. The Curt Hitch item…

view full answer...

Answer 9

I took a look at the owner's manual, and the towing capacity of your 2024 Toyota Grand Highlander is 5,000 lbs. We do have a hitch that fits your '24 Highlander and has a 5,000 lb towing capacity to give you the full towing capability of your…

view full answer...

Answer 10

Yes, the Curt Trailer Hitch Receiver #C26VV will fit your 2024 Toyota Grand Highlander Platinum model without any issues. If you let me know what you plan on using the hitch for I'd be more than happy to make any additional recommendations!

view full answer...

Answer 11

Unless you are experienced and have done an installation like this a few times I would strongly recommend hiring out for a job this complicated. I have worked on cars my entire life and I wouldn't mess with the wiring systems on these new…

view full answer...

Answer 12

The Curt Trailer Hitch Receiver #C26VV fits your 2024 Toyota Grand Highlander. This gives you a 2" receiver opening allowing for a large selection of hitch mounted accessories and ball mounts. I recommend installing the Curt Curt Powered Tail…

view full answer...

Weight of Curt Trailer Hitch Receiver For 2024 Toyota Grand Highlander

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching