Diameter and Weight Capacity of Malone Truck Bed Extender Roller # MAL52VR

Question

Question:

I want to use this roller to load a drift boat onto a trailer. it would be mounted on the back end of the trailer. what is the diameter of the roller and how much weight would the roller handle. the boat weights approx 350 LBS. Thanks

asked by: Kevin C

0

Expert Reply:

The roller part # MAL52VR is 2 inch in diameter and has a 375 lb capacity when used in the upright carrier part # MAL32VR.

expert reply by: Jameson C

0

Answer 1

I recommend using two of the Ladder Roller for Rhino-Rack Aero/Sportz Crossbars Item #SR680. We do not currently offer a kit to adapt the 59" ladder roller Item #RR1500 to Vortex Aero Crossbars Item #Y02-490B-NT.

view full answer...

Answer 2

Yes, you can use a lower-rated leaf spring for your 750 lb trailer, though the capacity of your trailer is going to be that of its lowest-rated component. I assume your trailer is 750 lbs unloaded, so if you were to change to a 1,500 lb rated leaf…

view full answer...

Answer 3

Karrier and Loadstar are two different brand names used by Kenda. There's no difference in quality or function between the two brand names. For a ST175/80-13 Radial trailer tire in load range D, I'd recommend part #AM10210 if you're…

view full answer...

Answer 4

The Yakima LongArm Truck Bed Load Extender #Y01149 is a great solution for hauling a longer kayak with your 2019 Ford F-150 5-1/2' bed. When in the fully-extended position the LongArm sits out 48" from the center of your hitch pin hole which…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

For your 2015 Jeep Wrangler Unlimited with a hard top you can use Rhino-Rack roof rack #RRSG59 and have a bar spread of 31-1/2 inches. For a compatible kayak carrier you can use #S512. And to carry a second kayak you would just need the expansion arm…

view full answer...

Answer 7

The Malone Axis Truck Bed and Roof Load Extender with Load Roller #MAL32VR has multiple height settings to allow it to be both a bed extender or roof rack extension. If you tilt the extender up at the connection point closest to the trailer hitch on…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

Hello Carol. I see that the 2019 Nissan Frontier has 3" round running boards. I have 2 different options it could be. You will need to check how many pins hold your pad onto your running board. If you have 5 pins you need #AA2090139, if you have…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

I do have a solution for you but there have actually never been any custom towing mirrors made for a Nissan Frontier and so I would be surprised if any ever come out for your 2019 Nissan Frontier. Since this is the case I recommend using the K-Source…

view full answer...

Diameter and Weight Capacity of Malone Truck Bed Extender Roller # MAL52VR

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching