Troubleshooting Loss Of Power To A Furrion Vision S Camera System When The Motorhome Is Running

Question:

We have a class C Tiffin motorhime on the Ford 350 HD Transit chasis. Our dealership installed the Furion Vision S rear camera that we want powered during travel. They powered it into our running lights at the top rear of the motorhome. It works with the lights powered on and thr engine off. As soon as you start the engine, signal is lost to the monitor. Will this filter work in this case? Thank you.

asked by: Candice L

Expert Reply:

It sounds like when the engine is running there might be more pulling power from the running light circuit and reducing the power running to the camera. You can test this by starting the engine and then testing the voltage at the camera with a multimeter. If you're not getting 12 volts then you are losing voltage and would need to install the PWM Filter # VGR64VR in order to fix this issue.

expert reply by: Kevin C