Parts to Install Inno Square Bar Roof Rack on 2023 Chevy Traverse Raised Rails

Question

Question:

I have an older set of square crossbars from Inno and I'd like to use them to get a roof rack on my 2023 Traverse with raised rails. What other parts do I need?

asked by: Kristen

0

Expert Reply:

The Inno square bar roof rack that fits the raised rails on your 2023 Chevy Traverse includes the following parts:

- 54" Square Crossbars # INB137
- Inno Feet # INFR

As long as your crossbars are at least 54" you just need the feet and you're good to go!

expert reply by: Jon G

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Thanks for all of the info! For your 2023 Chevy Traverse I recommend the following parts (please note that the base plates only fit if you don't have Lower Active Aero Shutters): - Roadmaster Direct-Connect Base Plate Kit #RM65MR - Roadmaster…

view full answer...

Answer 4

I really like the WeatherTech Mud Flaps part #WT110007-120007 that fits your 2007 Dodge Ram 1500 as it's custom fit so there's no drilling involved and they look like really nice as well.

view full answer...

Answer 5

The Buyers Products Mud Flaps #337B1018LSP are considered a universal fit and so long as you have enough room to mount them, they will fit on your 2019 Chevy Blazer. The mud flaps are 10" wide x 18" tall x 1/4" thick so you would need…

view full answer...

Answer 6

I went out into our showroom and measured the dimensions of a set of discontinued Thule square load bars and found that they are 7/8 of an inch by 1-1/4 inches. This is identical to the Inno square bars like #INB137.

view full answer...

Answer 7

For your 2015 Ford Fusion I do recommend the Inno roof rack because it's a great value. It will perform just as well as other options, but at a lesser cost. The correct fit for your '15 Fusion is the following: - Inno Aero Crossbars…

view full answer...

Answer 8

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 9

A two door vehicle is considered a coupe whereas a 4 door is a sedan. Since you have a 2 door vehicle that means you have a coupe which we do have roof rack fits for. The INNO Square Bar Roof rack part #INB137, #INSUT, and #INK683 is a confirmed fit…

view full answer...

Answer 10

There is not currently a Thule roof rack for your 2016 Honda Civic Coupe. My recommendation that is confirmed to fit your vehicle is the Inno Aero Crossbars - Aluminum - Black - 51" Long - Qty 2 #INXB130-2, Inno Through Feet for Aero Crossbars -…

view full answer...

Parts to Install Inno Square Bar Roof Rack on 2023 Chevy Traverse Raised Rails

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching