Compatibility of Redline Replacement Axle Spindles with Dexter Hubs
Question:
I need a 3500# hub spindle combo. Will TruRyde spindles take Dexter hubs? no brakes needed.
asked by: Jim K
0
Expert Reply:
TruRyde Spindles are indeed compatible with Dexter hubs, if the spindle is matched properly with the bearings your hub uses.
To find the correct spindle, match the inside diameter of your inner bearing, outer bearing and grease seal to the dimensions of the bearing surface of the spindle, as shown in the photo I provided. You'll also need to match the weight capacity of the spindle with that of the axle.
click to enlarge
expert reply by: Mike L
0
Product Page this Question was Asked From
#42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Similar Expert Q&A Pages
- Replacement Spindle for 7,000 lbs Axle
- Recommended Spindle, Idler Hub, Wheels and Tires For Homemade Cart Trailer Off Road Use Only
- Which Spindle is Compatible with # AKIHUB-865-7-1-K 7000 lb Trailer Hub
- How to Determine Correct Replacement Spindle Based on Measurements
- Trailer Spindle, Hub and Drum, and Electric Brakes for a Fabricated Utility Reel Trailer
- Which Spindle Do I Need To Use with 8 on 6-1/2 Drum and Hub Assembly part # 8-219-4UC3
- Which Hub Do I Need for the TRU57FR Spindle
- What Steel Is The TruRyde 42 Spindle # TRU57FR Made From?
- What Material are Trailer Spindles Made of
- Large Spindle and 8 Lug Hub Assembly For Crane Build
- Which Trailer Hub Works With the #42 TruRyde Spindle Part # TRU57FR
- What Size Spindle is Needed for a M/H trailer
- What Hubs Fit Spindle # TRU57FR
- 5-on-4-1/2-Bolt Pattern Hub for Use on Redline 2-1/4-Inch Spindle # TRU57FR
- Capacity of Trailer Axle Spindles # TRU57FR and # TRU34FR
- Stainless Steel Hub & Rotor Disc Brake Kit With Oil Bath & 6 on 5-1/2 Bolt Pattern For Boat Trailer
- Why Do Some Spindles Use Cotter Pins and Others Use a Tang Washer?
- Replacement Hub and Spindle For Trailer Using Tapered Spindle With Timken 24780 and 10183 Bearings
- Replacement 7,000LB Trailer Axle Spindle
- Will Trailer Hub Assembly part # 42655UC1-EZ Fit a Spindle TRU57FR
- What Bearing Kit Fits the Trailer Spindle part TRU57FR
- Will TruRyde Spindle TRU57FR Fit Dexter Trailer Hub Assembly 42865-KIT
- Compatibility of AKHD-655-6-K with TRU57FR # 42 Spindles
- Are There Replacement 4,400 lb Spindles
- Comparing Dexter Trailer Hub and Drum Assembly 8-219-4UC3-EZ and 8-219-4UC3
- Replacement Trailer Hubs for Spindle # TRU57FR or Spindle # TRU37FR
- What Spindle Fits the Dexter Trailer Idler Hub # 8-231-9UC1-EZ?
- Recommendation For Replacement Spindle And Bearings For Older Trailer
- Spindle With Same Dimensions as TRU37FR That Does not Have EZ Lube or Flange