Side Plates Needed To Install Demco 21K Autoslide 5th Wheel Hitch In a 2023 GMC Sierra 3500 Puck Bed  

You don't need a rail adapter. To attach the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider item #DM8550035 to your 2023 Ford F-350's puck system you will need the Underbed Mount Adapter Plates item #DM6033. I have attached a picture below…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

Hello Aaron. The Demco 21K Autoslide 5th Wheel Hitch #DM89GV for The Ram factory prep package weighs 330 lbs.

Thanks for reaching out, Chuck! The 18K Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550034 will work great with your Reese 5th Airborne pin box - you just need to lockout the rotating turret (if it has that feature) and then use either the…

When determining the height of your 5th wheel hitch you'll need to measure the height from the ground to the floor of the bed (where the base of the hitch will be sitting) and the height of the ground to your king pin when the camper is level.…

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

Thank you for all of the info! Yes, the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550034 will work perfectly in the rail system you have on your 2009 Dodge Ram 3500 so you'll be good to go!

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.