Will the B&W Universal 5th Wheel Rails Work w/ a Reese 30032 5th Wheel Hitch?  

The only 5th wheel rail kit that works with both your 1993 Ford F-250 and a Reese 5th wheel hitch is the B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches item #BWRVR3200. These rails have the industry standard mounting…

To find out your truck's max Gross Tow Weight (GTW) you have to subtract it's Gross Vehicle Weight (GVW or curb weight) from the Gross Combined Vehicle Weight Rating (GCVWR). These numbers can be found in your vehicle's owner's…

If you were looking for a similar hitch to what you had the Reese #RP30047 is basically the current version of the hitch you have and would work great. This will fit right into the rails you have on your truck.

The 30032 fifth wheel hitch is basically the older version of the #RP30047. Basically any set of industry standard fifth wheel rails would work, but without knowing the year/make/model of your truck it is hard to give you a specific recommendation.…

If you're referring to the 5th wheel hitch itself the then yes, you would be able to remove the hitch from the B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches #BWRVR3200 by removing the four pin and clips that…

For your 2007 Dodge Ram 2500 with 6-1/2' Bed I highly recommend the B&W Patriot 5th Wheel Trailer Hitch w/ Slider, #BWRVK3270 installed using the B&W Universal Base Rails, #BWRVR3200. The 3/4" thick jaw on the Patriot is precision…

The B&W Universal Base Rails and Installation Kit for 10 Bolt 5th Wheel Hitches, part #BWRVR3200 is just the hardware that installs into the bed of your truck, and you'll need to purchase a hitch separately.

For your 1999 Dodge Ram 2500 long bed there are only universal fifth wheel rail kits available that would require drilling into the truck frame like the B and W part #BWRVR3200. This is by far the best deal though so it would be way to go.

You will need to use all of the bolts required to install the B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches #BWRVR3200 to use the B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw #BWRVK3270. It is…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

With this truck bed configuration (6-3/4) on your 2024 Silverado 2500, you'll need a slider hitch so that you can make turns properly without the trailer making contact with your truck. I recommend the B&W Patriot #BWRVK3270 due to it's…