Reese Sway-Control Bracket Compatibility With The Convert-A-Ball Ball Mount Adapter  

I pulled one of the Ball Mount Adapters, part #BA-1 from our warehouse and took a measurement for you. As the attached photo shows, the center-to-center measurement is 2-1/2 inches. With 3 inch spacing on your shank this will unfortunately not work…

I went out to our warehouse to measure the Ball Mount Adapter for Convert-A-Ball Cushioned Weight Distribution Shank #BA-1 for you. The platform measured 11/16th inches which is the 3/4 inch platform they are referring to. I recommend the #BA-1 for…

The Convert-A-Ball Ball Mount Adapter #BA-1 has holes spaced 1-1/4 inches apart on center and the holes are 3/4 inches in diameter. This is standard for most weight distribution system shanks so it will likely fit provided the holes on your shank are…

To replace either of the hitch balls that come with the Curt Deep Drop Adjustable 2-Ball Mount #C49NR you need the Curt Dual Ball Attachment #C69NR. The individual hitch balls aren't replaceable so you have the get the platform piece, but you…

Yes, you can use the Convert-A-Ball Cushioned Weight Distribution Shank #AMAC1 without a weight distribution system and it will keep its 10,000 pound weight rating. The Ball Mount Adapter #BA-1 is designed to work with it just for that purpose and is…

According to Convert-A-Ball, although they recommend using the #CABPN-2 3/4 inch pins to secure the #BA-1 it is perfectly acceptable to use 3/4 inch Grade 8 bolts instead of the pins. The only downside is that changing the ball height would be more…

To be on the safe side, we will assume the maximums; trailer weight of 4,000 pounds and tongue weight of 425 pounds. When selecting a weight distribution system, the most important thing is properly matching tongue weights. That being said, you never…