Bearing Kits For Lippert 3,500LB Trailer Axles
Question:
I have a Lippert 3500 pound trailer axle. Can you help identify what bearings and seals are needed? It is axle Item #V000781711, LCI35-DBSA-76.5-59.5-NOSP-US-L-545-7209-18PT-3 V000781710.
asked by: Kelly B
Expert Reply:
You are going to want either our Bearing Kit # BK2-100 or the Timken Kit # TMK52VR. Both of these kits will give you the inner/outer bearings and races along with a grease seal and cotter pin/D-washer for one hub. You always want to replace the race when you replace the bearing since they ride on the race and will prematurely wear your bearings if they are even slightly distorted from the previous bearing set.
Here is a list of tools you may need if you are doing the work yourself.
Race Install Set # PTW83020
Seal Puller # PTW1219
Bearing Packer # ALL647646
Products Referenced in This Question
Powerbuilt Deluxe Bearing Packer
- Lubricants Sealants Adhesives
- Greasing Tools
- Bearing Packer
- Powerbuilt
more information >
7-Piece Installation Set for Bearings, Races, and Seals
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Tools
- Driver
- Performance Tool
more information >
Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649 and L68149
- Race L68111 and L44610
- Timken
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: 7-Piece Installation Set for Bearings, Races, and Seals
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Video: A Closer Look at the 7-Piece Installation Set for Bearings, Races, and Seals
- Search Results: trailer brakes
- Shop: Seal Puller
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Suspension Enhancement
- Video: Breaking Down the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Shop: Truck Topper
- Video: Timken Bearing Kit Installation
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Shop: Mini Momentary Switch - On/Off/On - DPDT - Black
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Search Results: trailer axles
- Q&A: What is the Best Grease for Trailer Bearings
- Search Results: idler hubs trailer axles
- Video: All About the Grease Seal
- Video: Feature Review Dexter DX7.5 Drop-N-Go Brake Actuator
- Q&A: Replacement Brakes, Hub/Drums, Bearings, And Seals For A Lippert 3,500lb Axle
- Search Results: tmk52vr
- Search Results: l68149
- Search Results: trailer bearings races seals caps
- Search Results: bearings trailer bearings races seals caps
- Q&A: Troubleshooting Grease Seal Leaking on 3,500 lb Axle
- Q&A: Help With Installing Dexter DX7.5L A-60 Brake Actuator On Boat Trailer
- Article: Trailer Wiring Diagrams