Replacement Fulton Jack for a Ranger Boat Trailer  

The Fulton Bolt-Thru Swivel Marine Jack, Weld-On #FXP15W is designed to mount to its mounting bracket with a single center bolt. The mounting bracket designed to work with this jack is part #P9012-00. In order to replace the weld-on jack on your boat…

The Fulton Bolt-Thru Swivel Marine Jack #FXP10 fits 3 x 5-inch trailer frames and comes with a bracket that we know matches the Ranger Trail swivel jacks like you have. I have attached a photo that shows the mounting bracket and the measurements…

Attached are some pictures of the measurements for the swivel mount portion of the Fulton Bolt-Thru Swivel Marine Jack #FXP10W0301. The bracket that you would have used for your Fulton Magnum trailer jack would be the part #P9012-00 which this jack…

The perfect replacement jack that you would need would be the Dutton Lainson Sidewind Jack part #DL22560 that you referenced. It will bolt right up to your mounting bracket and has 12 inches of lift. Check out the review video I attached for this…

Based on the pictures you provided it looks like the mount on your 1999R71 Range trailer uses a jack very similar to the Fulton Bolt-Thru Swivel Marine Jack #FXP10W0301. You will need to confirm that this jack will be compatible by measuring the…

Based on the picture you submitted the matching trailer jack we have to what you have is the Dutton Lainson part #DL22800. I attached an install video for you to check out as well. At the very worst you may have to use the bolt on brackets that come…

I do have some great replacement options for you but I don't know what this trailer comes with from the factory so the best option we can offer without knowing this is the Fulton Bolt-Thru Swivel Marine Jack part #FXP10 which features a simple…

Fulton and Bulldog jack brands are both from the same parent company, Cequent Performance Products, and they will share similar mounts. We offer side-mount, side-wind swivel jacks in both weld-on and bolt-on styles that you can see by clicking on the…

If your original Fulton jack is a snap-ring type swivel jack that uses the same 2.313-inch pilot hole diameter then Fulton 1200-lb jack #FTJ120W0301 should do the trick. You may not even need to bother with welding on the (included) new mounting…

Here is a Dutton-Lainson Round Swivel Jack #DL22335 it has an extra wide 3 inch wheel so it'll be easy to move around in any terrain and it will swing up to get out of the way. It fits frame sizes from 3 inches to 5 inches and has a 1,500 lb…

For a replacement jack for your Fulton you'd want the Fulton bolt on jack part #FXP15L which has a 1,500 capacity, a wheel caster, and will fit your trailer well. I attached a review video for more info on the jack as well.

The Fulton Magnum series jack on your 03 Ranger has been discontinued by the manufacturer. They list the #FXP10W0301 as a replacement for the discontinued jack if you have a bolt-thru mounting bracket or #FTJ120W0301 if you have a snap-ring mounting…