Hitch Ball Hole To Sway Control Ball Hole Distance For The Curt Sway Control Ball Mount # D320

Question:

Reese Friction Sway Control Kit install instructions state the sway bar ball hole should be 1 3/8inch forward, or closer to the tow vehicle, center to center than the tow ball. What is this measurement on the Curt Ball Mount w/ Sway Control Tab for 2inch Hitches - 3/4inch Rise, 2inch - 7,500 lbs Item # D320?

asked by: David

Expert Reply:

Hi David,

The sway control ball hole of the Curt Ball Mount w/ Sway Control Tab for 2" Hitches # D320 sits approximately 3/8" back from the hitch ball hole (from center to center). The instructions for the Reese # RP26003 do not apply to the Curt # D320 so you wouldn't need to follow those rules with this ball mount.

expert reply by: Kevin C