Inside Dimensions of Inno Box 2020 Rooftop Cargo Box

Question

Question:

What are the inside dimensions of the Inno Box 2020 Rooftop Cargo Box?

asked by: BM

0

Expert Reply:

The inside dimensions of the Inno Box 2020 Rooftop Cargo Box # IN86FR are 72" long x 25-5/8" wide x 12-3/4" tall.

expert reply by: Kyle S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 5

So there are really only a pair of differences at base between the Thule Motion XT and Thule Force XT rooftop cargo boxes. One is the aesthetic, with the Force XT having a textured, flat black finish, while the Motion XT has a high-gloss black…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 8

Hello Reyes; at this time (September 2024) there are no Rhino-Rack roof racks confirmed to fit your 2024 GMC Acadia AT4. The only roof racks we have that are confirmed to fit your raised rails are from Malone like the AirFlow2 #MAL74AR or #MPG215.

view full answer...

Answer 9

For some reason Toyota isn't very forthcoming with how to figure out if you have the tow package or not. From my understanding all of the V6 models of the 2019 Toyota Highlander have the tow package but it isn't specified as to what else…

view full answer...

Answer 10

Thank you for the information! It sounds like your 2020 Toyota 4Runner TRD Pro has the raised rails and OEM crossbar setup that we'd find on the standard 2020 Toyota 4Runner. This has very low clearance under the factory crossbars so it's…

view full answer...

Answer 11

Hello Mark, thanks for reaching out. I can confirm that yes, the #8880737 Replacement Clamp will indeed be compatible with the round crossbars on your Yakima Rack and Roll trailer. These crossbars are the same as the regular Yakima round bars. The…

view full answer...

Answer 12

The etrailer hitch part #e98844 is a confirmed fit for your Highlander since your spare is steel. The magnet test you performed proves it is steel since it wouldn't stick to aluminum. The aluminum wheel spare is just too wide which is why they…

view full answer...

Inside Dimensions of Inno Box 2020 Rooftop Cargo Box

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching