Replacement Parts For a MaxxAir MaxxFan Deluxe 8951K

Question

Question:

We have a MaxxFan Deluxe 4 speed #00-08951k in our trailers bathroom It’s not working right. Push the button to open it and it rises a little bit then closes. I’d like to buy the entire new fan again and just replace the fan and leave the part that is in the roof, so not to mess with the roofing. I can’t find the exact same model number fan. Will one of the new model numbers fan fit in the opening of my old fan? Thank you

asked by: Michael C

0

Expert Reply:

We do not carry an exact replacement unit for the MaxxAir Deluxe 8951K. We have the Smoke # MA00-07500K or White # MA00-07000K which would be the closest replacement. These fans use the same lift and fan motors but the control panels and circuit boards are going to be different so you would not be able to swap all the parts. Here are the replacement parts for your fan if you want to try changing out certain components. Also be sure to first check the power going to the fan as if the voltage is spiking or dropping it may be a wiring issue which is causing your issue.

Lift Motor # MA10-20270
Fan Motor # MA10-20968
Operator Mechanism # MA10-20281K-1AF
Circuit Board # MA10A04751KS

expert reply by: Bud M

0

Carson M.

3/19/2024

Our bathroom fan is exhaust only and is 4 speed Will a new fan fit in the opening of the old fan

Reply

Bud M.

3/28/2024

@CarsonM Yes, a new fan will fit the opening on your old fan. These fans as well as air conditioners all use the same 14"x14" opening. Sorry it took me so long to get back to you as our site had some glitch that prevented us from getting comments.

Reply

Carson M.

3/28/2024

Maxx Air said that a replacement would be 00-6200K But for now I bought the circuit board from you guys Thanks

Reply

Bud M.

3/29/2024

@CarsonM You're Welcome!

Reply

Tj L.

12/7/2024

Hello, thank you for the info regarding the Deluxe model 8951K. I am in need of a board for my unit and just wanted to verify the part number you linked above. MAXXFAN'S part number is 10-04751k according to the parts breakdown. The number on my current board is 10A04751KZ . I can't cross the number on the board anywhere and did not know if the "Z" had any significance. From what I gathered, I either need the MA39FR or 10C04751KS . Any clarification welcome.

Reply

Answer 1

Hey Kevin, we do have a replacement circuit board 10-04751K with the part #MA10A04751KS which fits the 8951k.

view full answer...

Answer 2

The correct circuit board for your MaxxAir MaxxFan 4951KS fan is the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. It also works with The MaxxAir MaxxFan 4751KS and 4761KS models as well.

view full answer...

Answer 3

I've had this same question before and when I reached out to MaxxAir they told me that the correct circuit board replacement for the 4900K is the part #MA10A21275K.

view full answer...

Answer 4

We do have a replacement circuit board 10-04751K with the part #MA10A04751KS which fits the 8951k.

view full answer...

Answer 5

If the knob is turning but you're getting no lift with your vent lid and you're able to simply lift it with a stick then the gear inside of your lift operator is most likely chewed up and in need of replacement. The correct replacement for a…

view full answer...

Answer 6

Whether the Camco RV Refrigerator Vent Cover #CAM42163 will fit on your 1993 Forest River Sandpiper depends on what refrigerator vent you have. The Camco RV Refrigerator Vent Cover #CAM42163 fits Camco, Domestic, and newer Norcold bases. The intended…

view full answer...

Answer 7

We do have replacement vent covers for the fridge roof vent that are designed for Dometic, Camco, and newer Norcold bases. The cover comes in White #CAM42160 or Black #CAM42163 depending on what color you want. There are 2 different sets of mounting…

view full answer...

Answer 8

The Camco RV Refrigerator Vent Cover #CAM42163 and Base #CAM42164 are designed to work with both Norcold and Dometic refrigerator vents. The base is designed to fit over a 24" long x 5-1/4" wide or smaller opening in the roof. The Roof Vent…

view full answer...

Answer 9

As far as refrigerator vents, we carry 2 options. Those are the Camco RV Refrigerator Vent Cover - Base Only #CAM42161 (white) or #CAM42164 (black). These models both have external dimensions of 26-1/4" long x 7-3/8" wide x 1-3/4" tall…

view full answer...

Answer 10

Michael, we actually don't have any replacement fan blades for MaxxAir fans unfortunately. We do have replacements for Ventline roof vents like #BVD0215-00 which is going to be smaller than the one you currently have but could still potentially…

view full answer...

Answer 11

You can use the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS to replace your damaged 10A04751ksz MaxxAir circuit board. This is a direct replacement.

view full answer...

Answer 12

The two most likely causes of a MaxxAir vent fan lid not opening or closing are either going to be a lift motor or operator failure. I recommend removing the motor and applying power directly to this to see if the shaft turns. If not, you know the…

view full answer...

Replacement Parts For a MaxxAir MaxxFan Deluxe 8951K

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching