Is There Normally Play with the Gen-Y Offset Gooseneck Ball for Ford OEM Pucks

Question

Question:

There seems to be some left/right wiggle on the puck feet after I installed this hitch in the 24 F250. Do you have any suggestions that might be the cause or is that normal? Theres probably 1/8 play if you push on the rear puck areas

asked by: Michael K

0

Expert Reply:

Hey MIchael, some play like that is normal with the Gen-Y ball part # GY43XR so I wouldn't worry too much about it.

expert reply by: Jameson C

0

Answer 1

Hey Michael, so for your 2024 Ford F-250 SumoSprings does have a Rebel with a lower weight capacity at 3,000 lbs with the part #SSR-129-40-2. This would do a great job of giving you the additional support you are wanting without making the ride so…

view full answer...

Answer 2

Hey Michael, the Grand Design Reflection 100 series 27BH that you are interested in has a Lippert 1621 style pin box so the Goose Box you would want is the part #RP94716 which was designed to fit it. The part #RP94716-61301 is same Goose Box but it…

view full answer...

Answer 3

Thanks for all that info, and for the absolute best weight distribution hitch and sway control for your trailer with a 1,300 lb loaded tongue weight is from Equal-i-zer: - Equal-i-zer Weight Distribution System with 4-Point Sway Control #EQ64FR The…

view full answer...

Answer 4

Yes, the Gen-Y offset ball adapter part #GY43XR that fits the Ford puck system of your truck can be used with the Reese Goosebox without voiding any warranties.

view full answer...

Answer 5

We do have an offset gooseneck that will fit your 2023 Ford F-250 Super Duty, but the part you mentioned is not a fit for your truck. Instead, what you will need is the following: - Gen-Y Hitch Gooseneck Trailer Hitch for Ford OEM Puck Systems -…

view full answer...

Answer 6

I looked up your 2021 Forrest River Sierra C Class 3330BH and since it has a tapered nose designed for short bed turning clearance and the short bed of your 2022 GMC Sierra 3500 is on the longer side you would be able to get away with a Gen-Y pin box…

view full answer...

Answer 7

With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…

view full answer...

Answer 8

We do have the Gen-Y Hitch Gooseneck Trailer Hitch #GY43XR which installs into your factory in bed hitch on your 2024 Ford F-250. This will provide you with a 2-5/16" hitch ball which is offset 5" from the factory mounting location. You…

view full answer...

Answer 9

The puck feet on the Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems #GY83XR is just to help stabilize the ball mount and does not lock into place in the puck. The locking mechanism on top will lock the shank into the gooseneck…

view full answer...

Answer 10

I recommend using the SumoSprings Rebel Custom Helper Springs #SSR-128-47-2 for your 2024 Ford F-350 Super Duty 4WD because of the higher 5,000 lb rating. Since the springs are progressive you won't get help from them until they are needed - so…

view full answer...

Answer 11

Unless you're using your truck to plow snow, most folks don't need suspension enhancement at the front. If you are pushing snow, the #SSF-111-54 with a 2800 lb capacity would work great. For the rears, I'd recommend #SSR-128-47-2 for 4…

view full answer...

Answer 12

For your 2024 Ford F-350 I recommend the SumoSprings Rebel Custom Helper Springs #SSR-128-47-2. These have the highest capacity at 5,000 lbs which will be great since you plan to tow and haul heavy loads frequently. They also have a 2 piece design…

view full answer...

Is There Normally Play with the Gen-Y Offset Gooseneck Ball for Ford OEM Pucks

Product Page this Question was Asked From

Continue Researching