Install Video For Curt 5TH Wheel Rail Kit On a 2014 Chevrolet Silverado 3500  

If your Reese 16K slider hitch is part #RP30075 then you can indeed use fixed leg kit #RP30727 to convert it to a stationary hitch and save a bit of weight. If you have the Reese Titan series 16K hitch RP30869 then the correct fixed leg kit is part…

Yes, if you wanted to convert your Curt Slider A20 hitch part #C16541 to be a stationary hitch all you need is the leg kit part #C16906.

Yes, what you would need is the base leg kit for Curt A20 part #C16906. This will convert your Curt A20 slider part #C16541 to a stationary hitch.

We do have a 30k fifth wheel hitch from Curt with the Curt PowerRide part #C22ER for a fixed hitch that fits standard above bed mounted rails. This hitch has an excellent jaw design that's very quiet, a cushioned head, and also a head plate…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…