Are Any Adapters Or Rails Needed For The Demco Autoslide For Ram Puck System # DM69GV

Question

Question:

Im looking to purchase the Demco DM69GV. It states that it is ready for the Ram 2500 OEM puck system but I wanted to make sure I wouldnt need anything additional like rails. Thanks

asked by: Lamar M

0

Expert Reply:

Hey Lamar,

The Demco Autoslide 5th Wheel Hitch w/ Slider # DM69GV has side plates with attachment points that will drop right into your Ram's puck system an without the need of any other kind of adapters or rails. The only thing you might need would be a new capture plate for the hitch head if you have an upgraded pin box (rota-flex, flex-air, Pull-Rite, etc.).

expert reply by: Kevin C

0

Answer 1

The fifth wheel hitch I recommend for your 2019 Ram 2500 short bed that has the OEM rail kit is the B and W Companion Slider for Ram rail kits part #BWRVK3670. This USA made hitch is widely considered by most RVers to be the best hitch you can tow a…

view full answer...

Answer 2

view full answer...

Answer 3

I recommend the Demco Autoslide 5th Wheel Hitch #DM89GV as the best hitch for your 2023 Ram 2500 short bed. This will drop into the factory bed mounts you have without the need for an adapter. This helps to reduce a lot of the noise other hitches get…

view full answer...

Answer 4

While the best and most certain way to tell if your 2018 Ford F-250 has the puck system is to call your local Ford dealer with your VIN, it should be pretty easy to tell otherwise. If your bed looks like the accompanying photo - with four accessible…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 9

The Demco Hijacker Autoslide #DM8550034 has a weight of 273 lbs. I've added a couple links to video reviews of this hitch for you to take a look at.

view full answer...

Answer 10

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 11

The Demco Autoslide 5th Wheel Hitch #DM89GV is an excellent choice for your 2024 Ram 3500 with the factory hitch prep. I prefer it as it can automatically slide back up to 14" as you turn so you do not have to manually get out of your truck to…

view full answer...

Answer 12

Hey Lamar, The Demco Autoslide 5th Wheel Hitch w/ Slider #DM69GV has side plates with attachment points that will drop right into your Ram's puck system an without the need of any other kind of adapters or rails. The only thing you might need…

view full answer...

Are Any Adapters Or Rails Needed For The Demco Autoslide For Ram Puck System # DM69GV

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching