Lift Kit that Fits Airstream Flying Cloud 30FBQ

Question

Question:

I have a Airstream Flying Cloud 30FBQ Office and would like to put a 3 lift on it. Do you sell the hardware?

asked by: Sam C

0

Expert Reply:

Hey Sam, so from previous customers we have found that your Airstream Flying Cloud 30FBQ has the Dexter Torflex # 11 axles so for a lift kit you'd want the part # K71-724-02 which will give you a lift of 2-7/8 inches.

expert reply by: Jameson C

0

Sam C.

5/7/2024

Any chance you know the what size the bolds are? I need to make sure I have the tools and I would like to get them at the same time.

Reply

Jameson C.

5/7/2024

@SamC The bolt size is 1/2"-13 Screw Hex Cap Bolts which are 1-1/4" long. The wrench size should be a 3/4 inch

Reply

Answer 1

Based on the available information for your 2022 Airstream Flying Cloud 30FB it looks like you have Dexter #11 Torflex axles. Assuming that is accurate, you need the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift #K71-724-02. I recommend verifying…

view full answer...

Answer 2

If the 19' Airstream International Serenity you are upgrading to has tandem #11 Torflex axles with a 4,500 lb capacity, the correct Torflex Lift Kit #K71-724-02 is what you need. This lift kit raises your trailer frame to provide 2-7/8"…

view full answer...

Answer 3

Yes, for your 2021 Airstream Globetrotter with tandem Torflex axles the lift kit part #K71-724-02 would be what you'd need to give you the lift of 2-7/8 inches.

view full answer...

Answer 4

Hey Gerry, we actually have a single axle version of the part #K71-724-02 with the part #DX56CR.

view full answer...

Answer 5

Thanks for the photo, David! The pin box on your 2022 Salem Hemisphere 369BL is a 1621 model with a 15.5K weight rating. To replace this with a Rota-Flex you need the part #LC328330. This is rated for 18K, but the extra bit of capacity won't be…

view full answer...

Answer 6

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

view full answer...

Answer 7

Hey Donald, thanks for reaching out! I recommend using the MORryde Cushioned Pin Box #MR84VR over the Curt Rota-Flex #LC328330 any day because it has better cushioning technology. Back in the day when the Rota-Flex was first released it was…

view full answer...

Answer 8

Thanks so much for the photo that was super helpful, and what the axle tag shows is that you have a #11 Dexter Torflex axle. We do have the correct lift kit for you, which is the following part: - Torflex Lift Kit - Tandem Axle #K71-724-02 This kit…

view full answer...

Answer 9

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

view full answer...

Answer 10

The Dexter Axle Torflex axles are basically broken up into the following categories: #9 - 1,000 - 2,200 lb #10 - 2,300 - 4,000 lb #11 - 4,100 - 6,000 lb #12 - 5,500 - 7,200 lb Based off of your 2004 R-Vision Trail-Lite Model 8306S being a tandem axle…

view full answer...

Answer 11

Hello again, James. We will need to consider a different approach here because the Timbren Silent Ride Suspension like part #TSR3500S05 cannot be used with torsion axles. In order to use the Silent Ride you would need to completely replace both…

view full answer...

Answer 12

The MORryde Cushioned 5th Wheel Pin Box #MR84VR you were looking at has a total height of 11.35" (pictured below) so you wouldn't see much of a difference from the standard pin box you currently have. Based on what you've stated and the…

view full answer...

Lift Kit that Fits Airstream Flying Cloud 30FBQ

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching