Determining The Correct Replacement Bearings For A 2022 Grand Design Transcend Xplor 265BH
Question:
Just confirming that I have the right Timken bearings for my 2022 Grand Design 265BH with 4400 lb axles.
asked by: James B
Expert Reply:
Hey James,
The bearing numbers used on your trailer aren't listed by the manufacturer unfortunately so we'll need to either remove and check them for their part numbers (if still legible) or measure the spindle and hub using a digital caliper # PTW80157. To get the inner bearing out to check you'll have to remove the grease seal and it will need to be replaced as well.
I've attached a diagram below showing where to measure on the spindle (B= grease seal, C & D= inner/outer bearings) and hub to get your inner and outer diameters, which we can use to determine the correct replacement bearings/grease seals.
(click to enlarge)
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Article: Big Truck Big RV
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: All About the Grease Seal
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Do Hub Races Have to Be Replaced Each Time Bearings Are Changed
- Shop: Timken Replacement Trailer Wheel Bearing - LM67048
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: 7-Piece Installation Set for Bearings, Races, and Seals
- Q&A: Timken Bearing kit for Dexter 4,400 lb Trailer Axle
- Q&A: Bearing Kits For Lippert 3,500LB Trailer Axles
- Search Results: l68149
- Shop: Trailer Spindle Nut 1"
- Shop: Timken Replacement Trailer Wheel Bearing - HM212049
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Q&A: How to Grease Hubs With a Bearing Buddy Installed.
- Search Results: bearing packer lubricants sealants adhesives
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Search Results: l68111
- Search Results: 165649
- Search Results: bearing seal tool
- Search Results: lm67048
- Search Results: 473336
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Shop: Trailer Hitch
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Shop: Trailer Wiring
- Video: MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways Review
- Video: What to Know About the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear
on Trailer Bearings Races Seals Caps
